The good news is, I know where the problem is. I even know how to fix it. I'm just looking for a "better" solution.

My trusty multi-meter and I determined that I have continuity and voltage through the brake pedal switch and down the harness to a large connector located just behind the driver's seat. After that, I have continuity but no voltage. (I should clarify; I have continuity from the "back" of the connector to the tail lamps)

If I can't come up with a better fix, I can always tap into the wires on either side of the connector and "jump" over it. I was just wondering if anyone had come across a way to actually fix the problem. (I have been diagnosed as obsessive/compulsive. I like "neat" solutions )

Thanks, in advance!

(EDIT: clarification)

------------------
Mike Spencer
NC Region
ITA/7 RX-7 #60
1990 RX-7 Convertible (street car)

[This message has been edited by Mike Spencer (edited August 19, 2004).]