I am installing a lever style proportional brake bias valve in my IT7 car. Should I remove the stock proportional valve?
Thanks
I am installing a lever style proportional brake bias valve in my IT7 car. Should I remove the stock proportional valve?
Thanks
you don't have to, but you can. works either way. i think i have a little more control without it.
dick patullo
ner scca IT7 Rx7
Consensus here is to remove http://www.rx7club.com/showthread.ph...ght=brake+bias
I removed the stock one on my 2nd Gen and found a good balance with 2 clicks up with the Tilton lever.
Mark B. - Dallas, TX
#76 RX-7 2nd Gen
SCCA EP
Former ITS, ITE, NASA PT
Thank both of you very much.
Bookmarks