While I'm asking these related questions, when wiring the Master switch, do you normally increase the wire size to account for longer runs, or just use the stock size? Stock appears to be 4 AWG. Depending on location of switch, longest run would be about 5 feet each way for a total run of 10 feet. Going to 2 AWG would certainly work, but is more expensive, heavier, and harder to work with.

My feeling is that the stock 4 AWG should be fine since the total electrical loads are going to be less than stock without power accessories, radios, turn signals and headlights (unless we do a night ECR but that is not likely).

Again, I'd love to hear opinions and what others have done.

Rory