Results 1 to 11 of 11

Thread: 1975 Toyota Corolla ITC Racecar

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Dec 2010
    Location
    Loveland, OH
    Posts
    33

    Default 1975 Toyota Corolla ITC Racecar

    1975 Toyota Corolla ITC race car for sale. The car has been my resto project for the last 3 years, but it's time for a change. I'm moving on to a new challenge. If you're looking for a classic RWD ITC car, this is it. $2000 for car and spares. Located near Cincinnati.

    IMG_1010.jpgIMG_1014.jpg

    Some details:
    - motor rebuilt last year: bored 0.040 over, gapless top rings, 2% leakdown and 160+ psi compression in all cylinders
    - aluminum radiator and oil cooler
    - weber carb, header, MSD ignition
    - welded cage with NASCAR bars
    - JAZ fuel cell with electric fuel pump
    - coilovers and strut tower brace in front, fiberglass leaves and Panhard bar in rear
    - 4.88 R&P with older clutch-type LSD
    - 2 sets of retro wheels (Enkei and Revolution) with Hankooks
    - many spares: 2 rebuildable blocks, set of 040 over pistons, 4 transmissions, 2 hoods, several fenders, new fuel pump, new Carbotech front pads, many more ...
    - professionally aligned and corner weighted in 2013
    Bob Gordon, Western Ohio Region

  2. #2
    Join Date
    Nov 2001
    Location
    Somewhere in the swamps of Jersey
    Posts
    399

    Default

    Is this the ex-Colletti car?
    Hero To The Momentum Challenged

  3. #3
    Join Date
    Dec 2010
    Location
    Loveland, OH
    Posts
    33

    Default

    No, although Steve helped me a lot rebuilding the car. The car came from the DC area.
    Bob Gordon, Western Ohio Region

  4. #4
    Join Date
    Sep 2008
    Location
    FL.
    Posts
    1,384

    Default

    Is it 2TC power? I dont show 75 in my book , just 71-74.Thanks, MM
    I love the car .
    Mike Ogren , FWDracingguide.com, 352.4288.983 ,http://www.ogren-engineering.com/

  5. #5
    Join Date
    Dec 2010
    Location
    Loveland, OH
    Posts
    33

    Default

    Yep, hemi-head, pushrod 2TC. The 75-79 model is the line just below the 71-74.
    Bob Gordon, Western Ohio Region

  6. #6
    Join Date
    Sep 2008
    Location
    FL.
    Posts
    1,384

    Default

    Thanks, That car is a great fit for HP. 12/1 comp, 450 lift, 4 -30mm holes feeding 41mmm intakes @ 2050ish weight
    It has the largest engine with twin carbs at a reasonable weight. Don Robinson has a very fast Nissan that has an 1.4 ish engine. Your Toy could be faster IMHO,maybe as fast as my VW Rocco.
    I would not run anything in ITC at this point in time.
    Mike Ogren , FWDracingguide.com, 352.4288.983 ,http://www.ogren-engineering.com/

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •