Results 1 to 3 of 3

Thread: Windshield wiper hotwire

  1. #1
    Join Date
    Jan 2005
    Location
    Alachua, Florida
    Posts
    261

    Default Windshield wiper hotwire

    I'm trying to control the wipers on my '94 Miata with a toggle switch. I thought I marked the correct connector when I removed the stalk but now I can't seem to figure out which wires to use. Of course the stalk is gone so that's no help. I'd prefer not to run new wiring all the way to the wiper motor. Any help will be much appreciated.
    Steve Elicati
    ITA 1994 Mazda Miata
    Central Florida Region

  2. #2
    Join Date
    Mar 2001
    Location
    Connecticut
    Posts
    7,381

    Default

    Glossing over the fact that this may be a non-compliant modification for Improved Touring...don't you have the required factory shop manual with wiring diagrams?

  3. #3
    Join Date
    Jan 2005
    Location
    Alachua, Florida
    Posts
    261

    Default

    9c. Gauges and instruments may be added, replaced, or removed.
    They may be installed in the original instrument(s) location
    using a mounting plate(s), or any other location using a secure
    method of attachment. Other than modifications made to
    mount instruments and provide for roll cage installation, the
    remainder of the dash “board” or panel shall remain intact.
    Switches to activate the ignition, the lights, the windshield
    wipers, the starter and other accessories located within the
    passenger compartment may be replaced and their location
    changed.
    Yes I have the fsm but apparently I'm wiring schematic challenged.
    Steve Elicati
    ITA 1994 Mazda Miata
    Central Florida Region

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •