Results 1 to 12 of 12

Thread: power or manual steering for mk3 itb?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #10
    Join Date
    Sep 2008
    Location
    FL.
    Posts
    1,384

    Default

    USA issue MK 3 all had PS. > There is a chance that the ultra low Hp Canadian issue non turbodeisel and the single point injected gas may have not had PS.
    My factory shop manual shows all PS . along with the Canadian engines.

    Edit, checked just now in the book. No mention of nonpower and the statement that" all models covered in this book have PS.". A3 all 1993 -1999.

    The normal situation over the years is to leave the belt very loose so that it leaves the car, along with removing the fluid from the pump.
    This is only done if the rest of the field has out- qualified you.
    You should be able to find the PS HP value from any of the Bpsec guys, David for sure as he dynoed the Mazda in box stock form and maybe the grassroots car.
    IMHO you would fail protest without PS. No place does it say that you need the belt or what the tension must be. FWIW there is about as much power iin the alt system..
    Last edited by Flyinglizard; 06-24-2014 at 03:37 PM.
    Mike Ogren , FWDracingguide.com, 352.4288.983 ,http://www.ogren-engineering.com/

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •