I took a look at the MSA Type 3 and I do not think it is legal.

Type 2 is legal I believe and what I have on my car. You can keep the front valance pan in place with a type 2 with a little modification. If you get the Urethane type you will need to add some stiffeners to the leading edge to keep it from folding downward at speed. Then again a splitter would support the leading edge as well.

Bumpers are available but not super cheap. You may be able to find one that needs repairs that will work fine for a race car. Straighten and paint, DONE!

Paul



Quote Originally Posted by BeerBudgetRacing View Post
Okay - I've seen several discussions of AirDams and the one I have is probably illegal (MSA Type 3).

Issue: Front Bumper - ain't got one. I actually have a 2" tube bumper we made (car was originally for lemons, team fell apart - damn kids and college - so I'm retrofitting).
Is the front bumper required? Is the original front bumper required?

Issue: Airdam GCR:" It shall not protrude beyond the overall outline of the body when viewed from above perpendicular to the ground, or aft of the forward most part of the front fender opening. This body outline does not include bumpers or bumper mounts."

So, as I read that, if I modify the MSA3 to tuck it under the body so the lower lip thing is even with the front of the hood, I'm okay?

Thoughts / suggestions ?