Results 1 to 6 of 6

Thread: Advance Design shocks

  1. #1
    Join Date
    Nov 2005
    Posts
    22

    Default Advance Design shocks

    I have inherited a set of Advance Design shocks on my RX-7. Can anyone tell me where I can have them re-valved when the time comes? Ground control says they don't do it any longer. Thanks.

  2. #2

    Default

    http://www.amfmotorsports.com/ might be able to help you. They service my shocks and seem to rep quite a few lines.
    #08 ITA/STL Miata

  3. #3
    Join Date
    Nov 2005
    Posts
    22

    Default

    Thanks for the tip!

  4. #4
    Join Date
    Jan 2002
    Location
    Atlanta GA
    Posts
    223

    Default

    Keep an eye on the canister pressure. I don't know what the ideal range is for those, but I am sure there are people out there who do. There were several guys running them in IT in years past. I was too much of a n00b to know what can pressure was when I had those shocks.

  5. #5
    Join Date
    Feb 2001
    Location
    Trussville, Alabama, USA
    Posts
    1,087

    Default

    280PSI/Nitrogen
    Chuck Baader
    White EP BMW M-Techniq
    I may grow older, but I refuse to grow up!

  6. #6
    Join Date
    Sep 2001
    Location
    alexandria, va
    Posts
    851

    Default

    ground-control.com for service on A/D's.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •