March 2014 Fastrack

[Andy Bettencourt]

I am being selfish for a second...
I put in a request on the rx8 that I thought the itac sent a recommendation to the crb on already. Can anyone verify that? I was hoping it would make the March publication.

Thanks, Stephen

The addition of the 2009 or something different?

[StephenB]

The addition of the 2009 or something different?

Yup. And if I could use a jdm cam :-) jk just the 09. Building Raymond a car and we have some 09 stuff we may want to use...

[JeffYoung]

Here's what I remember:

1. With the RSX, we had a real live request from a guy building the car for IT to move it to S. He's working with OPM and they believed the car, given curb weight, was a better fit in S. We'll probably see more higher than "normal" hp cars with higher than S average curb weights end up there. There is some talk of shifting the bogie for R slightly up, lowering the weights on all existing cars. THe perception, and I agree, is that the wrong bogie was chosen for R (the E36), since it is on the bottom end of the R scale, not the middle. No action on that yet, but there is talk of it.

2. Stephen, the decision on the 2009 RX8 was to add it, but to do so on a different spec line. Too many changes from the early model.

3. I frankly don't recall the discussion on the VWs. I'm not an expert on them, and tend to just listen and vote with what teh experts say if it makes reasonable sense.

[StephenB]

I can barely get the rx8 to weight now uggg.

Bummer on the 09 deal. That implies I need to change bumpers and such to classify one of ours as an 09. I am curious on what the multiple things are, nothing that I know of that would Frankenstein something any better. If I were to pm anyone can I get some of the details discussed?

Thanks for the update, do you think that will be in the April update?
Stephen

[benspeed]

The E36 is considered at the low end of R? Still seems pretty competitive....

Was curious if folks read the recent GRM issue on the E36 Putting out 240hp to the wheels with IT level mods....might have been 220 with cams making 240. The author made a big claim on that!

Was surprised that article didnt kick off its own thread :-)

[Greg Amy]

Actually, Ben, we had evidence of 220whp on the E36s back in the mid-00s, circa 2003 or so. That's why it got a restrictor and begat the idea of ITR...

Man, has it really been that long...? What was the year(s) that Bimmerworld were running the ITS cars and wiping up the world? My benchmark for the apex of all that was the year George Roffe attended the ARRC and came back all a-fluster about how f*****g fast the BMWs were...and we were all like, "um....duh. What do you think we've been talking about these past couple years...?" I'm thinking 2004...?

Edit: yup, he was there in 2004: https://improvedtouring.com...ad.php?t=16806

[benspeed]

Dude that is depressing - 10 years...and the debate on what coin that car makes still goes on.

So what is the target HP and TQ for ITR these days? I liked the thought of reducing R weight on existing cars...everybody knows how underpowered and overweight MY car is :-) lol ( insert my with any driver name)...:-)

[SPiFF]

There is some talk of shifting the bogie for R slightly up, lowering the weights on all existing cars. THe perception, and I agree, is that the wrong bogie was chosen for R (the E36), since it is on the bottom end of the R scale, not the middle. No action on that yet, but there is talk of it.

Yes please. Base ITR around the 350Z and push ITS up a bit so the low end of the current R could come down to S. The window for both S and R are 20+ years out of date for modern cars. Cars with 2L motors shouldn't have to weigh 11tybillion pounds in S.

[benspeed]

Hi Jeff it was two isues ago I think. Liking the thought of losing some poundage in
R. Seems that over 3000 lbs is a magic threshold where tires and brakes are consumed waay faster.

[seckerich]

[QUOTE=JeffYoung;353595]Here's what I remember:


2. Stephen, the decision on the 2009 RX8 was to add it, but to do so on a different spec line. Too many changes from the early model.



Curious to know for what reason. Cars have the same motor and are set at the same weight. If there was a difference that would impact its performance in IT it would come up with a different weight. That said you have just created a complex system for no reason. With the vin rule it is a moot point as we can build any shell to 09 spec.

[JeffYoung]

Can't remember who on the committee did the research on that but the list sounded extensive (of changes).

If we are wrong, I'll certainly reconsider it.

Let us know (in more detail) what you think.

[TomL]

I'm with Steve. What reason is there to have a different spec line for the 09+ RX8s? The differences I've seen mentioned are slightly different bodywork, different rear suspension geometry and different oil injector plumbing. And I've seen Mazda PR that says that the chassis was stiffened. If those are adequate criteria, you've got a lot of other cars that ought to have separate spec lines. Just off the top of my head, 2nd gen RX7s have multiple body configurations, 1st gen RX7s have two different rear suspension geometries, and Fox Mustangs have 2 or 3 different cross members. Numerous cars on a single line have different listed HP ratings in covered models, which counts for a whole lot more than an added oil injector. If these weren't sufficient in the past to necessitate a separate spec line, I don't see why it should be an issue with RX8s. And using the Process, they are all irrelevant, anyway.

Unless there is a difference in listed HP for the 09+ cars, or there is good (Process-quality)evidence that an IT build gives the later cars a bigger boost than the older RX8s, the Process ought to say there is no difference between older and newer cars.

[seckerich]

I will get some things together Jeff. I know the differences, and they are not anything that is considered in the process, thus they do not have any performance difference. Many cars on the list have a lot more differences than this one. The biggest thing we all want is the new transmission that is a toploader and actually has a 3rd gear cluster after more than one race. The early trans is junk. It was basically a MX5 trans and is very weak. They were fixed for 2009. Motor has 4 injectors , not 6, but same intake design. Power in IT trim unchanged. Either way there is nothing that can be combined to make a car better than either model on its own. Thanks for having an open mind.

[Knestis]

Does the different rear suspension bolt to the same exact pick-up points?

K

[Flyinglizard]

Glad to see SCCA look at the 16V.
The USA 16V came with AC and power steering AFAIK. It is possible that Canada had a 16V Rocco without AC and PS. I have never seen one.

The stock 16V has less open valve time than the RD 8V and just a little more compression.
All done with both very legal the 8V wil run right with the 16V @ about 50# more . The 16 carries about 40# more nose weight, spins a lot of valve parts along with the PS pump.
2325# would not make it a front runner IMHO. The squirted Mk 3 with early cam specs and double springs will still out run it up to around 2450#.
If the 8V wheels @108-110 with CIS, 111-113 squirted
the 16V spins around 113-115 (CIS, with PS and alt working)
The ABA 2.0 is well into low 118-120 or maybe a little more.

The 8V should be 2250#, the 16 @ 2325,
the ABA @ 2450 or maybe 2400.
Based on actual rollers. These are values used for the few VW Cup races. Some issues that we had; all of the 16V had too much compression, the wrong intake cam. The 8V had much of the same. We speced the Brazilian 268 cam for the 8V and allowed the two intake cams for the 16 V and it worked out fine with 50# spread .
I built 2 SCCA ITA 16V for customers and we promptly swapped to the 8V. same lap times.

I will roll these all in the next month or so, back to back on the same tires etc. I dont run any SCCa ABA legal engines tho.