Results 1 to 9 of 9

Thread: Oil Filter choice

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Aug 2003
    Location
    Hendersonville, NC
    Posts
    174

    Default Oil Filter choice

    I have a 300ZX ITS car. I use the stock oil filter location. Any recommendation on what brand filter would work best?

    TIA timo
    timo

  2. #2
    Join Date
    Jan 2010
    Location
    Houston-ish
    Posts
    932

    Default

    I used the OE Nissan filters on my VG and VE, but that was back when Nissan made the quality filters that weren't madeinChina.

    There are also some Toyota filters that worked well that have the proper anti-drainback valve to keep the top end happy at startup.
    Toyota: 90915-YZZA2

    Another comment from a Maxima guy (Maximas used VG30E and VE30DE)
    FL-1A motorcraft fits perfect, and filter is large holding a quart. Has a silicone anti drain back valve as well. The smaller FL-400S works as well, or the short version of the fl-1a, forgot motor craft number, bit cross reference frams ph16
    Houston Region
    STU Nissan 240SX
    EProd RX7

  3. #3
    Join Date
    Aug 2003
    Location
    Hendersonville, NC
    Posts
    174

    Default

    Thanks Matt! I have limited room due to the header but will try the Ford ones.
    timo

  4. #4
    Join Date
    Jan 2001
    Location
    Buffalo, New York
    Posts
    2,942

    Default

    The Ford ones are good filters--been using them for ages. Before that it was Purolator Pure Ones.

    The Ford Filters--actually Motorcraft--are always available cheap at Wal Mart.

  5. #5
    Join Date
    Jan 2010
    Location
    Houston-ish
    Posts
    932

    Default

    The Toyota filters are relatively small.

    You could also use the filters from the newer VQ35 engines. The threads match up, but the gasket diameter on some of them may be smaller as they're MUCH smaller filters. not exactly best choice, but if you have clearance issues it's something to consider.

    Can you relocate oil filters in ITS? If you have clearance problems, that just gives you more reason to relocate the filter to a more convenient place..
    Houston Region
    STU Nissan 240SX
    EProd RX7

  6. #6
    Join Date
    Aug 2003
    Location
    Hendersonville, NC
    Posts
    174

    Default

    Quote Originally Posted by Matt93SE View Post
    The Toyota filters are relatively small.


    Can you relocate oil filters in ITS? If you have clearance problems, that just gives you more reason to relocate the filter to a more convenient place..
    Yes you can, but there's not a lot of room on that side of the motor and I'd like to keep things as they are. I suppose I could tap in to the cooling lines.

    The problem is with the filter height - any longer than stock and it will be difficult to back the filter off the stud. I'll check it out when the weather warms up....

    Thanks for the advice!
    timo

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •