Who to build Honda Motor?

[Jtmurr02]

any recommendations for a motor builder?

driving 91 civic si want to build the max ita motor

im in ohio but would drive a reasonable amount

Thanks,
JT

[email protected]

[Knestis]

Blake Meredith would be right at the top of my list.

K

[Hawkeye]

King Motorsports in Wisconsin have a pretty good reputation for Hondas.
Happy New Year

[downingracing]

Scott Lunder up in Cleveland. Couldn't be happier with the motor he built for my ITA car.

[mossaidis]

Rep to all the folks listed above. Matt Kessler in CT built my z6 - baller. Special note to King. They built Moser's a6s and I would think they have it all spec'ed out to the max. Talk to Mike.

[lateapex911]

The closest top firm for an IT motor is King in Wisc, as others have suggested. If you talk to Scott, tell him Jake (G, from CT) sent you. Scott used to run AT Engineering here in CT way back when before he joined King, and then became the owner. They also did the Mosers recent prod car. As with any of the top shops, don't go in with an empty wallet. A "to the max" motor will set you back. King is a Mugen dealer and a Honda specialist.

Blake Merideth and Matt Kessler are also well respected, although much further away. Matt does mostly Miatas, and some Hondas. I'm not sure what Blakes coverage is. he's been in the game for quite awhile and has lots of racing experience. I know he does Honda, Porsche and more.

[Xian]

Blake Meredith would be right at the top of my list.

K

Yup. Tons of Honda experience... has worked at Sunbelt and OPM previously and now plays with Porsche stuff. He absolutely knows his stuff (as does Matt K, King, etc).

[raffaelli]

While everyone listed can and has built top notch engines, for my money the most complete honda package comes from Tom Blaney. I have a Bullet Proof engine and transmission in my CRX. Despite my attempts to grenade it....it just keeps producing gobs of power. It beats process numbers.

Toms guidance on tuning, after care and maintanence just push the value over the top.

Drop him a note. Since you are not in my region he his allowed to build one for you as fast as mine.

[email protected]

[lateapex911]

While everyone listed can and has built top notch engines, for my money the most complete honda package comes from Tom Blaney. I have a Bullet Proof engine and transmission in my CRX. Despite my attempts to grenade it....it just keeps producing gobs of power. It beats process numbers.

Toms guidance on tuning, after care and maintanence just push the value over the top.

Drop him a note. Since you are not in my region he his allowed to build one for you as fast as mine.

[email protected]

Duly noted and sent to the ITAC! The Mosers will not be amused at such information leakages, LOL.

[quadzjr]

Duly noted and sent to the ITAC! The Mosers will not be amused at such information leakages, LOL.

We all know that there are a few cars that make more than process power.. non of which I believe are being addressed by the ITAC. There are a few in ITS that make more than process as there are in ITA, and ITB. I assume the same is true for ITR and ITC but I am less familiar with them. I personally have built a few D15/D16s for IT racing.. The money you want to spend will determine what side of the process number you want to be on.

*BTW.. I know the Moser thing is a bit of a joke. mosers issue was sum of parts.. and not enough motor to get away from that sum of parts.

[Tom Blaney]

JT If you look at some of the fastest running LEGAL ITA Civic's and CRX's in the Northeast you will see that are running my Bullet Proof motors.

Tom Blaney