any recommendations for a motor builder?
driving 91 civic si want to build the max ita motor
im in ohio but would drive a reasonable amount
Thanks,
JT
[email protected]
any recommendations for a motor builder?
driving 91 civic si want to build the max ita motor
im in ohio but would drive a reasonable amount
Thanks,
JT
[email protected]
King Motorsports in Wisconsin have a pretty good reputation for Hondas.
Happy New Year
Scott Lunder up in Cleveland. Couldn't be happier with the motor he built for my ITA car.
Matt Downing
1995 Honda Civic EX Coupe - ITA
Ohio Valley Region, SCCA
Rep to all the folks listed above. Matt Kessler in CT built my z6 - baller. Special note to King. They built Moser's a6s and I would think they have it all spec'ed out to the max. Talk to Mike.
Demetrius Mossaidis aka 'Mickey' #12 ITA NESCCA
'92 Honda Civic Si
STFU and "Then write a letter. www.crbscca.com"
2013 ITA NARRC Champion and I have not raced since.
The closest top firm for an IT motor is King in Wisc, as others have suggested. If you talk to Scott, tell him Jake (G, from CT) sent you. Scott used to run AT Engineering here in CT way back when before he joined King, and then became the owner. They also did the Mosers recent prod car. As with any of the top shops, don't go in with an empty wallet. A "to the max" motor will set you back. King is a Mugen dealer and a Honda specialist.
Blake Merideth and Matt Kessler are also well respected, although much further away. Matt does mostly Miatas, and some Hondas. I'm not sure what Blakes coverage is. he's been in the game for quite awhile and has lots of racing experience. I know he does Honda, Porsche and more.
Jake Gulick
CarriageHouse Motorsports
for sale: 2003 Audi A4 Quattro, clean, serviced, dark green, auto, sunroof, tan leather with 75K miles.
IT-7 #57 RX-7 race car
Porsche 1973 911E street/fun car
BMW 2003 M3 cab, sun car.
GMC Sierra Tow Vehicle
New England Region
lateapex911(at)gmail(dot)com
Christian in FL | Something white with Honda on the valve cover...
FASTtech Limited- DL1, Schroth, & Recaro Goodness
LTB Motorsports- The Cheapest Place for Momo
TrackSpeed Motorsports- OMP, Racetech, & Driver Gear
While everyone listed can and has built top notch engines, for my money the most complete honda package comes from Tom Blaney. I have a Bullet Proof engine and transmission in my CRX. Despite my attempts to grenade it....it just keeps producing gobs of power. It beats process numbers.
Toms guidance on tuning, after care and maintanence just push the value over the top.
Drop him a note. Since you are not in my region he his allowed to build one for you as fast as mine.
[email protected]
Chris Raffaelli
NER 24FP
Jake Gulick
CarriageHouse Motorsports
for sale: 2003 Audi A4 Quattro, clean, serviced, dark green, auto, sunroof, tan leather with 75K miles.
IT-7 #57 RX-7 race car
Porsche 1973 911E street/fun car
BMW 2003 M3 cab, sun car.
GMC Sierra Tow Vehicle
New England Region
lateapex911(at)gmail(dot)com
We all know that there are a few cars that make more than process power.. non of which I believe are being addressed by the ITAC. There are a few in ITS that make more than process as there are in ITA, and ITB. I assume the same is true for ITR and ITC but I am less familiar with them. I personally have built a few D15/D16s for IT racing.. The money you want to spend will determine what side of the process number you want to be on.
*BTW.. I know the Moser thing is a bit of a joke. mosers issue was sum of parts.. and not enough motor to get away from that sum of parts.
Last edited by quadzjr; 01-03-2014 at 01:33 AM.
Track Speed Motorsports
http://www.trackspeedmotorsports.com/
Steven Ulbrik (engineer/crew/driver)
[email protected]
JT If you look at some of the fastest running LEGAL ITA Civic's and CRX's in the Northeast you will see that are running my Bullet Proof motors.
Tom Blaney
Bookmarks