Anybody have any info/pics on front splitters for a 1st gen? There are some available from various suppliers but are there any ideas on homemade or other options.
Anybody have any info/pics on front splitters for a 1st gen? There are some available from various suppliers but are there any ideas on homemade or other options.
Last edited by #8rx7; 06-02-2013 at 08:09 PM.
I've seen tons, and sorry to IT7 guys,(I used to be one of them) most of the homemade stuff looks, and performs like crap.
Making your own airdam is time consuming and likely more expensive than buying one.
Mike at ISC has a good one that fits well, is legal, and functions properly. And it's cheap. problem is, shipping is pricey and he might no longer be making them, as the 1st gen Rx-7 is nearing the end of it's run.
Call him and see if you can talk him into running a batch. Then get TWO. The shipping will be halved essentially, and you WILL need a second, unless you have it as a spare.
If Mikes not cooperative, then try and find someone that has one, get the proper mold release and resins, cloth, etc and pull a mold off it. it's a good piece, and could form the basis of something even better.
I know Dan Sheppard up in NH has one on his car since that one used to be mine. He'd probably be willing to talk about molds and such, but I think before you do that, call Mike at ISC.
Jake Gulick
CarriageHouse Motorsports
for sale: 2003 Audi A4 Quattro, clean, serviced, dark green, auto, sunroof, tan leather with 75K miles.
IT-7 #57 RX-7 race car
Porsche 1973 911E street/fun car
BMW 2003 M3 cab, sun car.
GMC Sierra Tow Vehicle
New England Region
lateapex911(at)gmail(dot)com
I bought Mike's last two. At least that's what he told me at the time (couple of years ago). Dad has a decent homemade one from aluminum. I can try to get some pics of it if you want? Course it's bent up along the bottom now from going on the trailer.
Learned on old IT7 car, now running ITS 944
Well, I have a brand new one that hasn't been on a car yet. Looks like I better figure out how to duplicate it before it gets put into service.
This is a copy of the ISC/Mazda Comp part that was installed on the 95 IT7 car 2 weeks ago
http://www.carbodykitstore.com/mazda...l?cPath=53_260
Free Shipping. We cant duplicate it for this amount.
Dan 77 IT7
Last edited by Dano77; 06-06-2013 at 09:48 AM.
All posts are made by a fat old guy with a crappy old car that isnt supported by a factory anymore and therefore should not be taken seriously, EVER
We buy our tires at WalMart 205/50-15 NT-01 $148.00 last all season and go faster as they wear out........
Driver Skills Development, 7's Racing Skunk Works
it7racing.com
Good find
Jake Gulick
CarriageHouse Motorsports
for sale: 2003 Audi A4 Quattro, clean, serviced, dark green, auto, sunroof, tan leather with 75K miles.
IT-7 #57 RX-7 race car
Porsche 1973 911E street/fun car
BMW 2003 M3 cab, sun car.
GMC Sierra Tow Vehicle
New England Region
lateapex911(at)gmail(dot)com
Bookmarks