Results 1 to 4 of 4

Thread: CRX Trailing Arm

  1. #1
    Join Date
    Jul 2010
    Location
    West Michigan
    Posts
    120

    Default CRX Trailing Arm

    Well this may have helped making my back end really squirlly last Fall.



    Uploaded with ImageShack.us

    I am looking for a replacement but it may prove difficult to find. I put a call into HPD but will need to wait till Monday.

    Looking for advice on finding a new one or repairing (welding possible?) the current one.

    Thanks!

    -Sean

  2. #2
    Join Date
    Sep 2012
    Posts
    107

    Default

    Same thing happened to me.. I only knew because a friend pointed out gigantic camber change! "Dude. Something is BROKEN ON YOUR TRAILING ARM".

  3. #3
    Join Date
    Jul 2010
    Location
    West Michigan
    Posts
    120

    Default

    Ya the damage is much worse than I thought. The crack goes up right along the curve above the showing crack. Proceeds up to the bolt holding on the knuckle on the right rear. Probably goes under it even. I will need a new one. :-/

  4. #4
    Join Date
    Feb 2003
    Posts
    1,106

    Default

    I have a couple of used ones that need new bushings. I am in GR and work in Kzoo.
    1985 CRX Si competed in Solo II: AS, CS, DS, GS
    1986 CRX Si competed in: SCCA Solo II CSP, SCCA ITA, SCCA ITB, NASA H5
    1988 CRX Si competed in ITA & STL

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •