You'll find that most race pads, whether it be Hawk, Carbotech, etc use a thinnerbacking plate than OEM.
Because of how the Raybestos pads are cut, the backing plates are much thicker than what Honda ships their pads on.
Senior Member
You'll find that most race pads, whether it be Hawk, Carbotech, etc use a thinnerbacking plate than OEM.
Because of how the Raybestos pads are cut, the backing plates are much thicker than what Honda ships their pads on.
Gregg Ginsberg
'96 Civic EX -- MARRS ITA #72
WDCR-SCCA Rookie of the Year 2003
MARRS ITA/T3 Drivers rep
Member
I have a set of DTC60s that have a lot of stopping power. I haven't experienced the fade as mentioned, but I have bent the backing plates on three different sets of Hawk pads(they came with the car). I'm thinking about looking into those Raybestos pads on my next change.
Kyle C
#69 ITA Honda CRX
Glen Region Timing & Scoring Chief
Posting Permissions
Reply With Quote
Bookmarks