4 door surge tank, Holley (red?) lift pump into a fuel accumulator/filter and then to the high pressure pump. It will run the cell bone dry. On edit, the surge tank inside the cell is probably fine. What you need to do is have a lift pump to take fuel to an accumulator/filter. The accumulator/filter is pipes as follows:
4 fittings on the a/f: bottom, to main high pressure pump. Top: return from motor, line from lift pump, and return to cell surge tank. Mine is plumbed that way... sputtered coming out of 5 at RA and I coasted across the finish line with the motor off and in neutral, completely out of gas.
Last edited by chuck baader; 02-09-2013 at 04:36 PM.
Reason: add
Chuck Baader
White EP BMW M-Techniq
I may grow older, but I refuse to grow up!
Bookmarks