Quote Originally Posted by DavidM View Post
I've got an ACT heavy duty PP and 6-puck solid disc on the way. I considered going with the 4-puck like Earl used, but I still drive the car on the trailer and thought the 4-puck might make that more of a PITA.
David
Sorry I wasn't more specific earlier; the only time the clutch in my car gets to be a PITA is when I'm driving around slowly in 1st gear - as in the paddock. The on/off the gas you do when driving slowly tend to be a little jerky, and the car will actually start to buck if you aren't paying attention. My solution is to get it moving and then coast with the clutch in, only letting it out when I need to accelerate again. Driving it on the trailer is no problem at all; you can slip the clutch just like a stock unit, it isn't 'grabby' at all. I think you'll be fine with the 6-puck disc though; in fact I doubt you would be able to tell the difference from a stock clutch.