Can we change this and the plumbing to use one or does it need to remain stock?
I don't have a GCR with me and my phone is HORRIBLE to try and find it.
Thanks,
Stephen
Can we change this and the plumbing to use one or does it need to remain stock?
I don't have a GCR with me and my phone is HORRIBLE to try and find it.
Thanks,
Stephen
I use mine as an oil overflow catch can.
OK So I got my answer... NOT legal to remove or use an alternate overflow bottle in IT. Bummer I kinda wanted to run an aftermarket one as they are much less expensive and I could mount it near the firewall away from the front of the car.
Oh-well Stock it shall stay!!
Stephen
3. Engine Cooling System
a. Any radiator may be used, provided it is mounted in the original
location, maintains the same plane as the original core and
requires no body or structure modifications to install. No new
openings created by fitting an alternate radiator may be used
for the purpose of ducting air to the engine.
b. Oil cooler(s) may be added or substituted. Location within the
bodywork is unrestricted, provided that it/they are not mounted
within the driver/passenger compartment.
c. Cooling fans may be removed or replaced. Electrically operated
fans with manual or automatic actuation may be fitted.
d. Thermostats may be modified, removed, or replaced with
blanking sleeves or restrictors.
e. Air conditioning systems may be removed in whole or in part.
f. Screens of one-fourth (1/4) inch minimum mesh may be
mounted in front of the radiator and/or oil cooler(s) and
contained within the bodywork.
g. Engine coolant fluid, coolant/heater hoses and clamps may be
substituted. Heater hoses may be plugged or bypassed (looped)
or removed. Heater water control valve(s) may be added or
substituted. Heater core shall not be removed.
Unfortunately, *functional* replacement coolant overflow tanks are extremely rare for my car. I have substituted one (actually, the car builder did...) that is made of the same material (plastic), and is of the same*critical* dimensions (working volume) as stock. Whereas the stock bottle was designed based on working volume, and was formed irregularly for packaging reasons only, I would cite 9.1.3.C as a basis for the substitution. Keep in mind, I'm not saying this isn't a very tortured interpretation of this rule, but that's my story and I'm sticking to it. I would much prefer we allow it, as I would expect that if I were protested on this specific item, I'd likely be found non-compliant.manufacturer.
9.1.3.C
Stock replacement parts may be obtained from sources other than the
manufacturer provided they are the exact equivalent of the original parts.
The intent of this rule is to allow the competitor to obtain replacement
parts from standard industry outlets, e.g., auto-parts distributors, rather
than from the manufacturer. It is not intended to allow parts that do not
meet all dimensional and material specifications of new parts from the
Matt Green
ITAC Member- 2012-??
Tire Shaver at TreadZone- www.treadzone.com
#96 Dodge Shelby Charger ITB- Mine, mine, all mine!
I was around when they actually improved Improved Touring! (and now I'm trying not to mess it up!)
Matt, I would argue in your favor given the information you've stated and the rules as posted. Going from a 20lb coolant bottle to a 2lb bottle, I could understand. (i.e. my F250 holds a couple gallons of coolant and is quite thick to hold system pressure.)
a non-pressurized expansion tank doesn't weigh much to begin with and are prone to rot. Good luck finding one in good shape for a 20 yr old car, and they're stupid expensive at the dealership- If you can even get them.
If the factory bottle held 2qts and your replacement held 2qts and was mounted in the same location (oh noes!! he moved 2LBS in his engine bay!), then I'd argue that your replacement is within the intent of the rules and IT philosophy, and contains no competitive advantage.
Houston Region
STU Nissan 240SX
EProd RX7
Remember, GCR overides ITCS. 9.3.15 states that OEM is kept when it is pressurized and working.
My resvoir is not pressurized, so I went aluminum.
Bookmarks