Koni Race Shocks - Where to buy?

[darthmonkeyIT]

PS, make sure that you know what rear shocks you need. As I recall, the '88 CRX's had a stamped steel rear lower arm and a eye on the bottom of the arm. The 89 - 91 had a cast iron lower rear A arms. Which arms do you have?

People often swapped arms to work with the shocks they could get. Your car has been around the block enough that it may not have the right original arms, check carefully b4 ordering.

Good advice! I have the cast iron lower A arms that came with the 89-91 CRX Si's.

I contacted Summit Racing as well and they can special order them for me for $267 per shock. There is another site I used in the past called THmotorsports that still has the best price at around $240 before discounts. Everything I ordered from them before was what it said it was but since they are not a main stream it is a little unnerving.

[backformore]

I got mine recently from THMotorsports.

[adamjabaay]

nick g at TH motorsports is a friend of mine and works hard Imo..... They are big Midwest supporters of local events like ours (wmhm.org) and are racers themselves

[darthmonkeyIT]

Thanks for the comments about THmotorsports! I feel more comfortable now knowing that some other people have used them as well.

[webhound]

Bumping.

I just need the metal sleeves that go through the shock bushings, that in turn the shock shaft goes through. The ones on the car are for the smaller shaft dia Bilsteins, I have two for the Konis but need another two. Anyone have an East Coast source for this?

[Gregg]

You can order these directly from Koni and they're very inexpensive.

See page 31 of this catalog for part numbers:
http://www.koni-na.com/pdf/KONI_Motorsports_2008.pdf

Best to contact Lee Grimes @ Koni.
(859) 586-4100 ext three one six

[Xian]

Bingo ^^^

Lee is the man.