Acura Integra build..

[gizmo83]

GCR confirmation:
1991 ITA Acura Integra:
Are rear ajustable bushing camber kits legal?
Are front camber plates legal?
Just wanted someone to confirm what we are reading!
Thanks for the help!
Denise

[Andy Bettencourt]

GCR confirmation:
1991 ITA Acura Integra:
Are rear ajustable bushing camber kits legal?
Are front camber plates legal?
Just wanted someone to confirm what we are reading!
Thanks for the help!
Denise

Call me D

508
878
2228

[JeffYoung]

Yes and yes.

[bamfp]

Jeff the front end is double a arm so no on the camber plates.

[Greg Amy]

Be careful on the "yes" for rear camber adjustment "bushings". Technically, Jeff's right, but Denise is new to the Integra; she may misinterpret the (non-compliant) aftermarket upper adjustable rear links as "bushings". And, the only "camber plates" I'm aware of for this car are ones such as these, which are based on modified stock upper arms and are also non-compliant in IT.

However, anything that replaces just the bushings and makes no mods to the arms (except for spot welds) is compliant. There's a guy on RRAX, handle "chris", that makes a nice set of sphericals for the car. I'm running his stuff on the STL Integra, good quality and a decent price.

Denise, you need to come over to my house with a 6-pack and we'll walk you through the Integra chassis with it on the lift. I can give you a good overview of the car and point out what may be compliant and non-compliant in IT. Other good sources for this info is Tim Klvana and Geoff Branscombe.

GA

[mossaidis]

Denise, Greg is correct. If it's easier, I can stop by upstate on my way to Saratoga Friday or on the way down to NYC on Sunday and go over the car as well. Mickey

[Tkczecheredflag]

Be careful on the "yes" for rear camber adjustment "bushings". Technically, Jeff's right, but Denise is new to the Integra; she may misinterpret the (non-compliant) aftermarket upper adjustable rear links as "bushings". And, the only "camber plates" I'm aware of for this car are ones such as these, which are based on modified stock upper arms and are also non-compliant in IT.

However, anything that replaces just the bushings and makes no mods to the arms (except for spot welds) is compliant. There's a guy on RRAX, handle "chris", that makes a nice set of sphericals for the car. I'm running his stuff on the STL Integra, good quality and a decent price.

Denise, you need to come over to my house with a 6-pack and we'll walk you through the Integra chassis with it on the lift. I can give you a good overview of the car and point out what may be compliant and non-compliant in IT. Other good sources for this info is Tim Klvana and Geoff Branscombe.

GA

Denise - I have a bushing source as well (Tom Blaney)- drop me a PM and I will send you my number and discuss.