I ran the Momo Start in a couple of my Miatae, and I'm 6'1". Key was to completely remove the rear seat mounting "pad" on the floor so that the brackets mount directly to the floor, as flush as possible. - GA
I ran the Momo Start in a couple of my Miatae, and I'm 6'1". Key was to completely remove the rear seat mounting "pad" on the floor so that the brackets mount directly to the floor, as flush as possible. - GA
Those pads are out, and the seat was sitting flush on the floor with the exception of a block to add some tilt to the seat.
I'll get it worked out. I've been told by some racer friends that comfort isn't that important in a racecar, I disagree.
It's hard to concentrate on your driving when you are trying to keep your head from bouncing off the rollcage.
John W8
CSP10 Miata
ITA50 Miata
Sorry to dig up an ancient thread but I have a Momo start seat. Certification intact FIA-8855-1999 manufactured July 2006. I do NOT want to run this seat with a back brace. Is this seat still legal without a brace?
YES.... scca.... thanks Greg, that is good news indeed.
Bookmarks