In the market for a new set of wheels and considering the team dynamic 1.2. If you have any pics with this wheel on a ITS 2nd gen,I would greatly appreciate if you could post a few pics. I know the wheel is pretty common in scca, but I can't seem to find any examples on a 2nd gen. If you could also let me know the offset, that would be great.
Yellow/white car is stock fenders and +35mm offset with .375" spacer. Black car is +25-30mm fiberglass fenders and +15mm offset with 1/8" spacers. Both have 225/45/15 R6 on them. Not "ITS" trim pictures but you get the idea. If ordering get +25mm for ITS, or +35mm if you don't want to wait as those are probably the in stock size in the states and add a .375" spacer.
Last edited by mbuskuhl; 12-22-2011 at 09:09 PM.
Mark B. - Dallas, TX
#76 RX-7 2nd Gen
SCCA EP
Former ITS, ITE, NASA PT
Man, these pictures are great and leads me to one conclusion, I am running my FC too high. I used to run it that low and got some exhaust dragging so I raised the car and took the easy way out. Thanks a lot, now I need to do some work to get it lower again. Another note on the list, grrrrrrrrr, .
Bookmarks