S5 Fuel Pressure Regulator

[monsterbronco]

ok sorry if this has been gone over before but i searched and have not been able to find anything.

looking to install a FPR on an S5.

so my understanding is i will have to cut off the factory FPR and weld on a fitting to be able to plumb the new regulator in. correct? suggestions on fittings?

this is all on the return side of the system correct?

FPR with a range of 30-70 PSI will be sufficient? I am on the fence with buying the kit from Flatout, ISC or just piecing it together from Summit Racing or such (not sure if this is even a good option from a financial perspective).

Thanks for the help!

[racingralph]

have raced for years with stock regulator in place.. the regulator you are considering will over-ride the stock pressure..

[Andy Bettencourt]

have raced for years with stock regulator in place.. the regulator you are considering will over-ride the stock pressure..

Which is the point. If you don't want to buy a programmable ECU, adjusting the FP on these cars can result on some found HP.

[monsterbronco]

Andy are you saying that with a programmable ECU an adjustable FPR is not necessary?

[Andy Bettencourt]

Andy are you saying that with a programmable ECU an adjustable FPR is not necessary?

On this car, I would say yes. Most cars run rich. With an AFPR you are making a 'crude' wholesale adustment to lean out the mixture to find the sweet spot on the dyno. With a programmable computer, you are going to end up doing the same thing but in a much more finite way. You can see much bigger gains by electronically controlling the fuel. But the FPR is a great way to find some power on the cheap.

[wlfpkrcn]

What fuel pressure are you guys running? Any recommendations on which regulator to use?