No Spark!

[Flyinglizard]

Check the cam timing, at both points,( cam to cam and cam to crank.)
MM

[jimbbski]

Check the cam timing, at both points,( cam to cam and cam to crank.)
MM

That is all good. The head was removed from the engine before I installed the engine. This engine sat for 5+ years so I wanted to check it out first. I then installed the head with the cams rotated to their correct TDC marks with the engnine at TDC too.

The issue is in the fuel injection, the fuel mixture at anything above idle is off. I have not adjusted the CO screw which was suggested to me to do by someone off line. I want to verify that all other systems are working correctly first before I do that.

[Lael Cleland]

check the wires under the boots @ the potentiometer & DPR.. they also break... and vac hose to knock box..