Billys, at stock length work very well. The bearing sq in ,is much higher than the Koni.
FWIW, if after install,(hanging on the lift) If the control arms point down less than 1 in. you will top out the shox and have a short life span..
MM
Billys, at stock length work very well. The bearing sq in ,is much higher than the Koni.
FWIW, if after install,(hanging on the lift) If the control arms point down less than 1 in. you will top out the shox and have a short life span..
MM
Mike Ogren , FWDracingguide.com, 352.4288.983 ,http://www.ogren-engineering.com/
Bookmarks