Quote Originally Posted by Matt93SE View Post
While you're on the subject of brake ducts, any hints on attaching them to the spindle? Never seen it done properly before- lots of zip ties that melt or don't hold anything in place.

The way to do it is to make a plate that includes mounting holes that mate up to existing bolt holes on the spindle. If I build some for the stang I'll copy something like this:

http://store.kennybrown.com/files/im...e%20Duct_0.JPG

It mounts onto the spindle using the dust shield attachment points. Seals off the inside of the rotor and insures the air passes through the rotor vanes as it should.