ITS Ford Mustang(s) Build - Stripper Stang Part II

[Ron Earp]

Since weight is a big concern, and we know we're going to be quite a bit over the bogus spec weight, I've been keeping track of optional items that we could ditch to lose weight.

Here I weighed all the gauges, panel, switches, wire, camera, and so on of the data acquisition/video system. Not nearly as high as you might think, 4.5 lbs.

[Ron Earp]

I got most of the main panel done this morning. Tire pressure monitor works, and from a long distance from the tires too, about 20 ft to the furthermost tire. The tire pressure monitor is neat in that you can create set points at which the display color will change, for example, the tire pressure is shown in red over say 40 psi.



Next up is the car harnesses. I've already built them on the bench but they must be installed.

[Knestis]

I'm picturing countermeasure spoofs to turn all of your tire pressures to blinking red zeros when you are lapping me.

K

[CRallo]

Ron, what wire crimpers are you using?



LOL

I'm picturing countermeasure spoofs to turn all of your tire pressures to blinking red zeros when you are lapping me.

K

[Ron Earp]

I haven't felt all that wonderful after my surgery, but I slept about five hours this afternoon and felt much better. Once I got up I managed to put a few hours in on the car. Nothing strenuous, just a bit of graphics work and wiring.

As far as crimpers and tools for wiring this is what I use. The best tool is that proper crimper there that does blue/red/yellow crimps. Everything else, like the connectors in the weatherpak connectors, I solder.



Sydney popped in the garage and took a couple of rare photos of me in my natural environment. I wore my PJs all day, including while wiring in the garage. Quite comfy.





I like the fact the car is roomy inside and the entire passenger area is open. While it isn't a big car by normal standards, it is huge by IT rule. When it was being off loaded from the trailer the other day it seems that it is a good 6" to maybe 12" wider than most ITS cars that I've been around.

I managed to cut a few sheets of graphics in orange and silver. Logos for Hoosier, engine decals, tow, Buell stickers for my bike, stripes, and some other stuff for the number 57 ITS car that is new for 2012.....

[CRallo]

cool, just checking glad to see it, figured you would be... If you gotta crimp, it's gotta be one of those.

Glad to hear/see you made out okay with the surgery. Nothing like sleeping it off!

[lateapex911]

You look a lot better after YOUR surgery than I did after mine!!!
Not that I could have stopped anyone, (honestly, i couldn't even adjust the darn hospital bed!) but if I could have, there is no WAY there were any pictures to be taken of me!

And if I were putting decals on my car the day after, I assure you they would be illegible, LOL.
Good job, great to see you back at it.