Can I run my 1999 SM in ITS?
Can I run my 1999 SM in ITS?
Kevin Anderson
Pretty much yes. Some things allowed in SM are not IT kosher but because the cars is not an over dog I think most people ignore little stuff. I know we have a lot of double dippers up here.
dick patullo
ner scca IT7 Rx7
Christian in FL | Something white with Honda on the valve cover...
FASTtech Limited- DL1, Schroth, & Recaro Goodness
LTB Motorsports- The Cheapest Place for Momo
TrackSpeed Motorsports- OMP, Racetech, & Driver Gear
Vent window replacement/removal? Is that legal in IT? I forget.
Both this & depowering the steering rack seem like they have merit for being allowed, but that's a topic for another thread.
Last edited by Andy Bettencourt; 04-28-2011 at 01:31 PM.
Do you have to remove the "vent windows" in pairs or can you keep one and remove the other. If you remove the passenger side vent window bracket, doesn't that effect the door window (roll up)? I can't find anything in the GCR (IT section) that says whether or not I can dump the passenger window as well.
Thanks!
Last edited by red986s; 05-13-2011 at 04:24 PM.
Mitch
#64 ITA Miata
#64 FP Miata
Mannschaft Schwartz Auto-Rennen
http://www.youtube.com/user/red986s1
I believe, in IT, you can only remove the door windows if you run nascar door bars and those bars pass through the cavity of the door... or something like that. tGA?
Demetrius Mossaidis aka 'Mickey' #12 ITA NESCCA
'92 Honda Civic Si
STFU and "Then write a letter. www.crbscca.com"
2013 ITA NARRC Champion and I have not raced since.
Thats true. But, read the definition of "Nascar bars" in the glossary and "into the cavity" isn't specified in any way/minimum amount, so build accordingly.
Jake Gulick
CarriageHouse Motorsports
for sale: 2003 Audi A4 Quattro, clean, serviced, dark green, auto, sunroof, tan leather with 75K miles.
IT-7 #57 RX-7 race car
Porsche 1973 911E street/fun car
BMW 2003 M3 cab, sun car.
GMC Sierra Tow Vehicle
New England Region
lateapex911(at)gmail(dot)com
9.1.3.9.m. If equipped, the vent window and its supporting structure may be removed.
Hmmm... the way that's written, it could be interpreted to mean you can remove only one vent window, your choice of which one. In any case, it certainly appears to allow the removal of just one.
WRT removal of the vent window "supporting structure" forcing the removal of the roll-up window, I asked that question early on, and was told (by an ITAC member, FWIW) that this allowance was not intended to force removal of roll-up windows.
Sounds good, I figured as much on the passenger side. Just wanted to clear up the controdiction I thought I read.
I do want to remove the drivers side. I installed an Ultra-Shield Rally sport seat. It has shoulder supports that eat up a lot of room in the window opening. Making it tough to escape if needed. Any problem attaching a hose to the passenger side duct/vent to direct air my way after removing the one on the drivers side?
See ya at MAM in June Gary?
Last edited by red986s; 05-13-2011 at 10:40 PM.
Mitch
#64 ITA Miata
#64 FP Miata
Mannschaft Schwartz Auto-Rennen
http://www.youtube.com/user/red986s1
Does anyone think that the 99+ Miata can be built into a top dog ITS car??
W J Weaver
Absolutely -- it already has been.
ISC in Florida built two of them. Kip's yellow car won IT Fest I think and came close to winning the ARRC; Mike's blue car won the very competitive SARRC championship once or twice.
It takes some work to get the necessary power out of them, but if you do...watch out.
NC Region
1980 ITS Triumph TR8
Bookmarks