Thanks for the props, and also thanks for recognizing that last point.

1 hp "error" on our (the ITAC) side in either getting the stock hp right or the gain right means 17 lbs in ITB and what, 22 or something in ITC? So a 10 hp "error" in ITC is TWO HUNDRED AND TWENTY POUNDS -- on a car that weighs probably 2000 to 2200 lbs.

On an ITR car? 11 lbs per hp on cars that generally weigh closer to 3000 lbs. So if we make a 10 hp error there, it's 110 lbs on a 3000 lb car.

B and C are hard for us because the downside for not getting it right is much higher.

But we do try, I promise you that.

Quote Originally Posted by shwah View Post
Sorry if it came off differently, but it was meant as a positive comment. We still need to resolve the front runners that hold a significant lb/hp advantage, but I feel better about that today than I did a year ago.

I have come to realize that ITB, and if it were more widely subscribed, and saw more cars added/built raced ITC will always be very difficult for the ITAC to deal with. At the end of the day, the more lbs/hp targeted in the process, the more sensitive it is to the assumed hp going in. So we see big swings any time power gain assumptions are adjusted. That means small errors will have larger effects and it will always be tougher to "get it right". It's good to see so much effort put towards getting there though .