Rules question- Protege suspension mod

[Aged racer]

I'm a little fuzzy how to interpret IT rules on whether I can swap a stock rear suspension link for the one in the picture below. Car is an ITB Protege.

Appreciate y'all's opinion:


Thks- Steve

[Andy Bettencourt]

I'm a little fuzzy how to interpret IT rules on whether I can swap a stock rear suspension link for the one in the picture below. Car is an ITB Protege.

Appreciate y'all's opinion:


Thks- Steve

Steve,

What part of the rule are you fuzzy on? Drop a quote on us that makes you think you can swap them.

[JeffYoung]

Probably no, unfortunately. You can add traction bars and sway bars, but swapping out a stock link is usually a no no unless the replacement is an aftermarket equivalent, same in the manner set forht in the GCR.

[Aged racer]

It's this portion of the wording:

Suspension Control

1. Any anti‑roll bar(s), traction bar(s), panhard rod or watts
linkage may be added, removed, or substituted, provided

its/their installation serves no other purpose.


Fuzzy is probably the wrong word, at least as regards the rulebook. It's more me not understanding suspension nomenclature. Jeff set me straight- this piece replaces a stock link, not one of the allowed pieces.

Just wanted to be sure, would rather ask up front.

thks- Steve

[chewy8000]

Is this going to be a MARRS or SARRC B car !?!?! From what I saw at the ARRC last year the Protege is a very strong platform for ITB.

[Harvey]

Steve

Give me a call and or drop me a email.

Les Chaney