If your spring perch is above the tire, you might not need the spacer with the 35mm offset. If your perch is below the top of the tire (like mine), you will need a LOT of spacer, unless you have a very low offset. The Slipstreams are 35mm offset and I'm running a 17mm spacer (had them made hubcentric). Without it, I can't get enough camber without the tire rubbing on the spring (currently -2.5 to -2.75 deg).
Was tempted to get some Spinwerks and get the offset to 10-15mm, but just not in the budget anymore. Neither is a fresh motor...
Bookmarks