Originally it was a CIS-E car but the motor that was sent to me was set up without throttle switches or oxygen sensor. Everything else was attached including fuel distributer and all accessories. One thing I haven't installed yet is an included Autotech module. The instructions say to tap into the full throttle switch but he had it set up without any throttle switches. He had a dash switch but stated he couldn't tell the difference with it on or off. So that's why I haven't installed it.
He also told me that he set timing to 34 degrees prior to shipping but I couldn't start the car with it set that way, so I reset timing and it started right up.
Could it also be low fuel pressure? I measured pressure at 70 psi but I wonder if maybe the fuel filter could be restricting flow. Its fairly new so wouldn't think it would be clogged already but may change it anyways.
By the way, this was Tim Pitts' old stuff, which was David Boles' old car. So I'm confident that the set up worked great in their car. I just need to get it to work in mine. :-}
Thanks