Bought a 88 CRX SI ITA car

[joeg]

Try and contact "Number 7 Honda" in Toronto, Canada for that part. I am informed that they found the piece a couple weeks ago for a buddy with the same issue.

You can also look up the number on Hondapartsdeal.com, if you do not know it yet.

The piece came out of the Montreal parts depot, but I do not know if any are left. It is in excess of $200.00, I am told.

[cjb25hs]

if you strike out go on car-part .com my search showed at least 30-40 of them across the us from 40-100 bucks. Not sure what your zip code is so I would go that route.

[Davegt74]

Thanks I sent them a message asking if they had the part

David

[StevenS]

Any update on the rear subframe availability? I'm now in need of one as well. Absolutely no chance of repairing what is in the car now. I tried the various parts places listed above and either got no response or was told that the part is no longer available from Honda. I'm starting to think the only way to get this thing is to cut it out of a junkyard shell, which makes me really nervous...

I'd really hate to part out a repariable racecar because of such a small issue.

Steve Sancricca
1988 CRX ITA #27

[Davegt74]

Sorry I haven’t looked for awhile
I am in moving mode right now going to a new F16 unit
The car is in storage

But a junk yard item seems to be the way to go, I already bought one of those spot weld removing drill bits just need to get time to find one in a junk yard

Davegt27

[Davegt74]

I made it to a Junk yard and bought the rear lower cross member I needed

$150

They cut the back half of the car off then I marked out the area I needed (small enough to move around)

I was able to use the local Auto hobby shop and drill out the spot welds

So we are making progress
David

[Davegt74]

Hi everyone

I just picked up the CRX from the frame shop and it is all repaired now


I Found a place that had done several Hondas before and knew how to do the job

David

[lateapex911]

Sorry I haven’t looked for awhile
I am in moving mode right now going to a new F16 unit
The car is in storage

But a junk yard item seems to be the way to go, I already bought one of those spot weld removing drill bits just need to get time to find one in a junk yard

Davegt27

The repair work looks super!
F-16 unit? jet jockey? If so, I'm jealous, LOL.

[Davegt74]

The repair work looks super!
F-16 unit? jet jockey? If so, I'm jealous, LOL.

No just a Tech

The car will go on the alignment rack tomorrow

I am new to Hondas so I don’t even know what specs to give him

Anyone have any spec they can share

David

[lateapex911]

If i had to align a CRX, this is one guy here on the board I'd write:
https://improvedtouring.com...er.php?u=10430

Christian Shipp, CRX racer.