I've been doing some searches to get an idea what might be needed
and getting ready for the drivers school this weekend (that's if it does not snow)
David
I've been doing some searches to get an idea what might be needed
and getting ready for the drivers school this weekend (that's if it does not snow)
David
nice looking MR2
Ohh.. yeah.. congrats on the honda thing to! haha.
Track Speed Motorsports
http://www.trackspeedmotorsports.com/
Steven Ulbrik (engineer/crew/driver)
[email protected]
oops fixed
received the shifter extension Pic after i get 4 posts LOL
David
vBulletin MessageIn an effort to stamp out forum SPAM only members with 4 posts or more can post website links or email addresses.
Dave
If your going to the NJ Motorsports park event this weekend, I will be one of the instructors, so look me up. I've been racing CRX's for a number of years (just retired a year ago) and can give you some tips.
I also manufacture some custom parts for that car as well as winning motors and gearboxes.
Thanks Tom
I am in CO
you can do so little to an ITA car i cant think of what you would make.
I did not want to make to many changes to the car so i bought this shifter extension off Ebay
Davegt27
don't know exactly what his capability are, but here is a short list.
Spherical suspension bushings
Custom wiring harness
Stand alone ECU
headers/exhaust
Sway bar end links
Sway bar mounts
speedway rear bar
Final drives
etc...
then there is the whole building motor and tranny thing.
There is a few people around that can do all of these if you are in the market for them, myself included.
Last edited by quadzjr; 03-26-2010 at 08:24 AM.
Track Speed Motorsports
http://www.trackspeedmotorsports.com/
Steven Ulbrik (engineer/crew/driver)
[email protected]
I see
I got out my 2004 rule book and the CRX got a pretty big wt reward
on the scales the left front is over 700Lbs but the tire load rating is 1135lbs
this scares the heck out of me
question can we use 15" wheels? (I am guessing 15" tires will have a higher load rating)
David
yes.. in ITA you can use 7" wide wheels.
15x7 are a common wheel size.
in ITB you can run a 15x6
Track Speed Motorsports
http://www.trackspeedmotorsports.com/
Steven Ulbrik (engineer/crew/driver)
[email protected]
Bookmarks