Page 1 of 2 12 LastLast
Results 1 to 20 of 26

Thread: Oil Wt s & Brands?

  1. #1
    Join Date
    Jan 2002
    Location
    Sayre PA USA 45 Miles from Watkins Glen
    Posts
    816

    Default Oil Wt s & Brands?

    Have been using Mobil 1 15-50 Extended Performance. Seems like the available weights have been reduced/no longer available. Castrol Sytec seems to have more options for wt 10-40. Mobil seems to be now limited to 10-30 5-30 Now Castrol has the "edge" now available?
    Tom Weaver: Logistics & Technical Support Manager IE truck driver for 1986 RX-7 ITS #63. "Diesel Haulin' Rotary" 2005 Dodge 2500 Quad Cab The Hemi has retired "Long Live the Hemi" Bill Weaver Driver- 2004 NYSRRC John Chave Award. 2006 & 2013 ITS NYSRRC Champion!. Truck Driver Named Glen Region Worker of the Year 2008.Located 45 miles southeast of Watkins Glen in Sayre PA.

  2. #2
    Join Date
    Jul 2008
    Location
    Vermont
    Posts
    721

    Default

    Quote Originally Posted by tdw6974 View Post
    Have been using Mobil 1 15-50 Extended Performance. Seems like the available weights have been reduced/no longer available. Castrol Sytec seems to have more options for wt 10-40. Mobil seems to be now limited to 10-30 5-30 Now Castrol has the "edge" now available?
    Tom...you didn't say if it was for a race car or your truck. I'm trying a new 10w-40 syn oil(SYNMAX) in my 98 cup car. Seems like some engineers went and looked at the properties of all the good racing oils and formulated their own. It's about the same cost as Royal Purple, a little more than Redline,less than Mobil One racing oil and way less than Joe Gibbs. All these oils have far more ZDDP(zinc) and other additives that are removed from street oil because they eat the cat. converters. Flat tappet engines(such as small block chevys,fords,etc love the ZDDP.

    You could also try Brad Penn(which is the old Kendall(sp?) GT green oil which is the only Pennsylvania crude still being pumped and is green(natural) in color.

  3. #3
    Join Date
    Jan 2002
    Location
    Sayre PA USA 45 Miles from Watkins Glen
    Posts
    816

    Default

    Quote Originally Posted by BruceG View Post
    Tom...you didn't say if it was for a race car or your truck. I'm trying a new 10w-40 syn oil(SYNMAX) in my 98 cup car. Seems like some engineers went and looked at the properties of all the good racing oils and formulated their own. It's about the same cost as Royal Purple, a little more than Redline,less than Mobil One racing oil and way less than Joe Gibbs. All these oils have far more ZDDP(zinc) and other additives that are removed from street oil because they eat the cat. converters. Flat tappet engines(such as small block chevys,fords,etc love the ZDDP.

    You could also try Brad Penn(which is the old Kendall(sp?) GT green oil which is the only Pennsylvania crude still being pumped and is green(natural) in color.
    Bruce, Truck Gets Rotella (no question on that) so looking for the Mazda Racer Internal Inspection revealed we might need a 5 or 10 weight to get to flow quicker to bearings then 40 or 50 on upper end. Used the Kendall GT for many years when they were Major Sponsor at Watkins Glen. working tech we had inside with the dealer and we got the GT-1 for nearly free! Because of the temps run by the Rotary use the Syntheic . T
    Tom Weaver: Logistics & Technical Support Manager IE truck driver for 1986 RX-7 ITS #63. "Diesel Haulin' Rotary" 2005 Dodge 2500 Quad Cab The Hemi has retired "Long Live the Hemi" Bill Weaver Driver- 2004 NYSRRC John Chave Award. 2006 & 2013 ITS NYSRRC Champion!. Truck Driver Named Glen Region Worker of the Year 2008.Located 45 miles southeast of Watkins Glen in Sayre PA.

  4. #4
    Join Date
    Oct 2002
    Location
    Wandering the USA
    Posts
    1,341

    Default

    No expert here, but I've used Mobil 1 10W30 in the ITS RX-7 for about 5 years. Should run cooler than higher weight and maintains good oil pressure. Haven't had the engine apart so I don't know what the internals look like, but no observable problems yet.
    Marty Doane
    ITS RX-7 #13 (sold)
    2016 Winnebago Journey (home)

  5. #5
    Join Date
    Jul 2008
    Location
    Vermont
    Posts
    721

    Default

    [QUOTE=tdw6974;303571]Bruce, Truck Gets Rotella (no question on that) so looking for the Mazda Racer Internal Inspection revealed we might need a 5 or 10 weight to get to flow quicker to bearings then 40 or 50 on upper end. Used the Kendall GT for many years when they were Major Sponsor at Watkins Glen. working tech we had inside with the dealer and we got the GT-1 for nearly free! Because of the temps run by the Rotary use the Syntheic . T[/QUOTE

    ]

    Tom...perhaps try the Brad Penn since it's like the Kendall.

  6. #6
    Join Date
    Jun 2004
    Posts
    366

    Default

    I am curious as to how long you guys go between oil changed? We, myself and an E Prod driver, change oil every 8 heat cycles.

    We have always used 20w/50 mineral or 15w/50 synthetic wt oils from Valvoline and Mobil 1. Both seem to be fine in terms of heat and pressure. On recomendations from several engine builders - Tony Riveria, Jesse Prather - we don't use low viscosity oils.

    Regarding increased ZDDP levels, I can certainly see the value for an oil the contains zinc in a solid lifter piston engine. I wonder if there would be the same concern/value in a rotary engine. I can't really think of a bearing surface in a rotary that is similar to what you have with a lifter and a cam lobe. Where do you guys see the value in ZDDP??
    Scott Peterson
    KC Region
    83 RX7
    STU #17

  7. #7
    Join Date
    Sep 2008
    Location
    Weare, NH
    Posts
    483

    Default

    Quote Originally Posted by Eagle7 View Post
    ....ITS RX-7 for about 5 years. ... Haven't had the engine apart ...
    hmmmm....I don't think we've ever gone more than 2 seasons
    on an engine in either the 14 or the 82 car...congrats!

    Glenn Lawton
    GSMmotorsports
    #14 ITS RX7
    NARRC ITS Champion 2012
    NERRC ITS Champion 2013 12 11 10 09 08
    NERRC STU Champion 2010

    __________________

  8. #8
    Join Date
    Jul 2008
    Location
    Vermont
    Posts
    721

    Default

    Quote Originally Posted by mustanghammer View Post
    I am curious as to how long you guys go between oil changed? We, myself and an E Prod driver, change oil every 8 heat cycles.

    We have always used 20w/50 mineral or 15w/50 synthetic wt oils from Valvoline and Mobil 1. Both seem to be fine in terms of heat and pressure. On recomendations from several engine builders - Tony Riveria, Jesse Prather - we don't use low viscosity oils.

    Regarding increased ZDDP levels, I can certainly see the value for an oil the contains zinc in a solid lifter piston engine. I wonder if there would be the same concern/value in a rotary engine. I can't really think of a bearing surface in a rotary that is similar to what you have with a lifter and a cam lobe. Where do you guys see the value in ZDDP??
    Scott...I ran the syn. oil specially made for RX7's last season. The name is Idemitsu and it's the same Japanese brand that helped Mazda win their class at LeMans in the 90's. Made for rotaries and you can by it online from Mazdatrix.

  9. #9
    Join Date
    Jul 2008
    Location
    Vermont
    Posts
    721

    Default

    interesting thread on oil

    http://micapeak.com/info/oiled.html

  10. #10
    Join Date
    Oct 2002
    Location
    Wandering the USA
    Posts
    1,341

    Default

    Quote Originally Posted by mustanghammer View Post
    We have always used 20w/50 mineral or 15w/50 synthetic wt oils from Valvoline and Mobil 1. Both seem to be fine in terms of heat and pressure. On recomendations from several engine builders - Tony Riveria, Jesse Prather - we don't use low viscosity oils.
    Do you know why they make that recommendation?
    Marty Doane
    ITS RX-7 #13 (sold)
    2016 Winnebago Journey (home)

  11. #11
    Join Date
    Feb 2002
    Posts
    402

    Default

    Wal-mart carries Mobil 1 15W-50 (not the extended performance line) for @ $25/gallon.

    http://www.mobiloil.com/USA-English/...1_15W-50_.aspx

    Not the same as the old extended performance line, but should be close.

    http://www.mobiloil.com/USA-English/...AQs.aspx#FAQs3
    David Russell
    IT Volvo 242

  12. #12
    Join Date
    Sep 2005
    Location
    Savannah
    Posts
    155

    Default

    Using Valvoline 20/50 regular oil in our POS-7. Watching this with interest how many of you are using synthetics. We change every weekend with two of us running the car.

  13. #13
    Join Date
    Dec 2009
    Location
    Holly Springs, NC
    Posts
    131

    Default

    I am running the Valvoline VR1 race oil, 20w-50, in my rx7. Guy who had it before me ran Castrol GTX, but I got some recomendations to switch to the valvoline from some other racers. I change it every other race weekend.

  14. #14
    Join Date
    Jan 2002
    Location
    Sayre PA USA 45 Miles from Watkins Glen
    Posts
    816

    Default

    We probably will go to the 10-30 Mobil 1 Extended performance. Our Engine rebuilder recommended the lower viscosity to get oil to the Bearings more quickly on start up. We did get 5 years on this engine(same as Marty on His engine) We used to Change every other Race weekend but then when we started running the Pro-it weekends with 30 minute practice and 45 Minute race. Plus we try to run regional if on same weekend we went to changing every weekend. Always some oil remains in cooler and lines. use the Idemitsu for our premix. Need to find an East coast source for Idemitsu to cut coast of shipping . Our Engine on tear down showed wear but not certain that may have been there when we got the car.
    Tom Weaver: Logistics & Technical Support Manager IE truck driver for 1986 RX-7 ITS #63. "Diesel Haulin' Rotary" 2005 Dodge 2500 Quad Cab The Hemi has retired "Long Live the Hemi" Bill Weaver Driver- 2004 NYSRRC John Chave Award. 2006 & 2013 ITS NYSRRC Champion!. Truck Driver Named Glen Region Worker of the Year 2008.Located 45 miles southeast of Watkins Glen in Sayre PA.

  15. #15
    Join Date
    Dec 2006
    Location
    Dallas, TX
    Posts
    564

    Default

    Quote Originally Posted by rx761 View Post
    I am running the Valvoline VR1 race oil, 20w-50, in my rx7. I change it every other race weekend.
    + 1.

    Quote Originally Posted by tdw6974 View Post
    Our Engine rebuilder recommended the lower viscosity to get oil to the Bearings more quickly on start up.
    Consider an Accusump with manual valve. Mine releases 3qts at 80PSI (or wherever you close the valve at) into the system before start up every time. I assume you are also using the MFR bearings.
    Mark B. - Dallas, TX
    #76 RX-7 2nd Gen
    SCCA EP
    Former ITS, ITE, NASA PT

  16. #16
    Join Date
    Jun 2004
    Posts
    366

    Default

    Quote Originally Posted by Eagle7 View Post
    Do you know why they make that recommendation?
    The bearing surfaces in a rotary engine are very large and in order to maintain a good oil film they recommended thicker viscosity oil. As far as longevity is concerned my Prather IT7 engine lasted for 7 years using Amsoil and or Mobil 1 20/50. It died when an oil cooler line failed...was running real good that day too So, as far as synthetic oil is concerned, we have seen no problems with it. We also do not have functioning oil injection on any of our engines - we use 2 cycle oil and premix 100 to 1.

    For sure, the best way to fight a dry start is to install an accumsump. My engine will have one in my STU car. In addition to having the bearings lubed at startup an accusump will prevent oil starvation on the race track. I installed an oil pressure light (yeah after I lost an oil line) and on occassion it flickers after abrupt manuvers.....like turn 5 at Gateway. All that said, I have yet to pull apart a dead street engine that had bad bearings. The housing were trashed but the E-Shaft and stationary gear bearings were fine.
    Scott Peterson
    KC Region
    83 RX7
    STU #17

  17. #17
    Join Date
    Apr 2010
    Location
    Boston, MA
    Posts
    145

    Default

    Hoping to revisit this. I am finally running out of the oil that I received from a sponsor a couple years ago and looking to start buying again. It's Amsoil 10-40 racing I believe (I don't have it in front of me). Doesn't look like they make it anymore.

    Tom, how did the change workout?

    I don't see anyone mentioning the zero weight...

    Comments?
    Last edited by team-gpracing; 08-14-2013 at 10:50 AM.
    '77 Mazda RX-3
    NER SCCA E-Prod

  18. #18
    Join Date
    Jan 2002
    Location
    Sayre PA USA 45 Miles from Watkins Glen
    Posts
    816

    Default

    Quote Originally Posted by team-gpracing View Post
    Hoping to revisit this. I am finally running out of the oil that I received from a sponsor a couple years ago and looking to start buying again. It's Amsoil 10-40 racing I believe (I don't have it in front of me). Doesn't look like they make it anymore.

    Tom, how did the change workout?

    I don't see anyone mentioning the zero weight...

    Comments?
    Well We made several changes (different engine builder) So we use Idemitsu racing oil http://www.idemitsu-usa.com/ We will use the 10-30 for winter storage then go to 20-50 for race season. Of course when changing weights you can't get all out so we phase in went to 20-50memorial day weekend at Watkins Glen. Of course test day on Friday we had Snow Sleet and Rain!! Then We did change oil again before July Sprints (but were unable to run) Then just ran at Pitt International Temps not too High(outdoor) and Stable water temps and oil temps and got some suggestions From Viper Team as how to get that even better! Zero weight makes me nervous LOL
    Tom Weaver: Logistics & Technical Support Manager IE truck driver for 1986 RX-7 ITS #63. "Diesel Haulin' Rotary" 2005 Dodge 2500 Quad Cab The Hemi has retired "Long Live the Hemi" Bill Weaver Driver- 2004 NYSRRC John Chave Award. 2006 & 2013 ITS NYSRRC Champion!. Truck Driver Named Glen Region Worker of the Year 2008.Located 45 miles southeast of Watkins Glen in Sayre PA.

  19. #19
    Join Date
    Jan 2001
    Location
    Buffalo, New York
    Posts
    2,942

    Default

    Mobil 1 does make a 0-w50 race oil.

    I bought a case (found it on-line), but it took forever to arrive.

    Other than that purchase, Walmart's Mobil 1 15 W-50 5 qt juggs are a deal at $23.00.

  20. #20
    Join Date
    Jan 2010
    Location
    Houston-ish
    Posts
    932

    Default

    You rotary guys are nuts. Castrol GTX 5w30 in my stupid 4-banger, and it's never given me so much as a hiccup.
    Houston Region
    STU Nissan 240SX
    EProd RX7

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •