Results 1 to 11 of 11

Thread: Fuel Cell filler location

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2001
    Location
    Royal Oak, MI, USA
    Posts
    1,599

    Default

    I'm not entirely sure if I understand... are you talking about can you use a remote fill valve or do you have to use the one on the cell?

    Either way - realize that it's financially and safety-wise in your best interests to use the fill cap on the cell. If you fit a remote one, there's need to fit all kinds of safety bits like check valves etc in case the hose is ripped off in an incident. Even so, it's still safer anyway to just not have bits that can rip off and spill copious amounts of gas. Instead, you can have a filler that's blocked off from the driver's compartment entirely.

    I'm going through this now on my DSR thanks to a legacy long filler neck from the FF I'm converting; makes me glad all over again that I didn't put one on my IT car...
    Vaughan Scott
    Detroit Region #280052
    '79 924 #77 ITB
    #65 Hidari Firefly P2
    www.vaughanscott.com

  2. #2
    Join Date
    Jan 2005
    Location
    Alachua, Florida
    Posts
    261

    Default

    just curious why would you want to put a cell in a miata? the stock tank is in the perfect spot, low and in between th axles.
    Steve Elicati
    ITA 1994 Mazda Miata
    Central Florida Region

  3. #3
    Join Date
    Feb 2010
    Posts
    4

    Default Fuel Cell filler location

    I am using the stock location (behind the front seats) the cell will sit higher than the stock tank and the filler hose will be almost horizontal. The option of using a filler cap on the cell directly
    Does not work due to its location (you would have to fill from inside the cockpit not very convenient during an enduro). I have seen MX5 in Koni with the fillers in the trunk (dry break), but I don’t know if that would be legal?
    -Richard

  4. #4
    Join Date
    Jan 2001
    Posts
    291

    Default

    That would be ok, just make sure the entire assembly is seperated from the driver's compartment by a bulkhead or thick aluminum box. There's an ita civic for sale in the classifieds that has a nice looking set-up.
    Chris

    Unsquishable bug on the way!!!!!

  5. #5
    Join Date
    Nov 2005
    Location
    Jacksonville, FL
    Posts
    734

    Default

    Yeah, remote fill/dry break is completely legal. The big caveat is that the filler has to be "flush with the body". Take a look at the pics of my setup and it might help you with some ideas.

    Christian
    Christian in FL | Something white with Honda on the valve cover...
    FASTtech Limited- DL1, Schroth, & Recaro Goodness
    LTB Motorsports- The Cheapest Place for Momo
    TrackSpeed Motorsports- OMP, Racetech, & Driver Gear

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •