IT Motor Mounts, please send in your yes votes to the CRB

[erlrich]

He's either an idiot, or he's joking.

I'm gonna lean to "joking"

-Tom

I going with C) he's going to the absurd to make is point. There's a lot of that going around lately.

Again, I'm not sure why this is a big deal, unless you're building (or have built since 1/1/08) a car. For those of us with cars whose logbooks were issued prior to that it doesn't matter.

[Chip42]

the long and short of it is that door bars and the like don't matter. what matters is the car making weight, and using only allowed mods to the power and drive trains.

too often we fight regarding all of these rediculous nit picky points. motor mounts will give few a real advantage, they are cheap to make yourself (by filling) or to buy and may be a better alternative (as in safety, per the intent of the class) to stock for many applications. if you drive an MR2, for example, it could lead to a torn chassis so it's not for everyone. neither is the removal of a window via door gutting (some use open trailers still and have lead on the floor anyhow). but there's no reason not to allow it IF THE RULE IS WRITTEN CLEANLY so as to forbid the relocation or reorientation of the driveline components.

I could go on for hours about some of what I view to be absurd or overly tight rules but I think we should stick to the toppic at hand.

I would add that the replacement of stock motor / trans / diff mounts should be an either / or with the added stabilizer. - i.e. no urethane mounts and added stabilizer link. but I wouldn't fight too hard for such language as it's, overall, not very important in the grand scheme of things.

[jhooten]

In a previous life I was a Police Officer. One little blonde cutie batted her eyes and did all the little flirty things she though would get her out af the well deserved ticket. It didn't. As I turned to walk back to my car I heard her shout "thanks alot you f...ing asshole". Ok I'm an asshole. I just give what I get.

Drivers come through tech, look in another drivers car, then come running over to the tech crew and demand we write up some percieved violation of the competitors car. Either you want us to do your dirty work or you don't. BTW, the way it works here is if it is not the the cheif stewards list of tech items for the event we can't even look at it. Write your own protest.

Idiot, if so I'm in a lot of company here.

Sombody got it. If enters the door by .0001 is compliant where is it measured from and how is is measured? Strained and tortured.

C) Ok, again lots of company there. .0001 is absurdly small.

Lot of pot and kettle going on. Quite a few need to take a good look in the mirror.

Or maybe it was just one of those days.


To the OP, sorry for taking this so far off topic. Comments have been sent to the CRB on the issue.

[vr6guy]

I learned alot about "motor mounts" on this page.