I have been looking at Main bearing for a JH 1.8L, and at the same time thinking about rebuilding my 2000 Audi A4 1.8T.......The A4 brg # is 06a 198 491 The 16V 1.8L # 026 198 491...

The main journal size in the 1.8T is 54.00mm the JH is 53.98? So if I use the 1.8T brgs, will I have to run gear oil to have oil pressure?

My reason for trying these is because the 1.8T brgs can handle 180hp+....

2nd reason, I like just wasting time.....