Results 1 to 14 of 14

Thread: Help! Durability of Kumho V710, Hoosier R6

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    May 2008
    Location
    Cleveland, OH
    Posts
    327

    Default Help! Durability of Kumho V710, Hoosier R6

    OK, I'm throwing this out there.

    Not talking about cost, OR performance, OR ease of use, OR contingencies. But instead, DURABILITY.

    How does the Kumho V710 compare with the Hoosier R6? In other words, how many FULL race weekends could one "normally" expect to get out of each brand? (By "normally" I mean just that. I don't mean hustling a car around like a Hollywood stunt driver, or timidly taking corners as if on eggshells.)

    Any replies will be sincerely appreciated.
    Chris
    #91 ITR Mustang
    1st place-2008 Great Lakes Division Championship Series
    1st place-2009 Kryderacing Series

  2. #2
    Join Date
    Dec 2001
    Location
    raleigh, nc, usa
    Posts
    5,252

    Default

    Can only speak to the R6, which is a great tire. Heat cycle it and store it right, and you can get 3-4 full weekends (two qual and race sessions) out of them on my car. 12-16 heat cycles.
    NC Region
    1980 ITS Triumph TR8

  3. #3
    Join Date
    Feb 2001
    Location
    Trussville, Alabama, USA
    Posts
    1,087

    Default

    My car is reasonably easy on tires...710s easily lasted a season...5-6 race weekends. Still had rubber left and were still fast. Chuck
    Chuck Baader
    White EP BMW M-Techniq
    I may grow older, but I refuse to grow up!

  4. #4
    Join Date
    Feb 2006
    Location
    Daytona Beach, FL
    Posts
    98

    Default

    I've ran both and the Kumho's will last longer and still have good grip. On average about 4-5 more heat cycles. The other thing I like about the Kumho is they seem to stay more consistant through out the race. I ran the R6 for a year and have been running the Kumho for 2 years now.
    Darryl Pritchett
    ITA #92 Dodge Neon
    2008 SE DP Champion
    2010 CFL Region ITA Champion

  5. #5
    Join Date
    Feb 2007
    Location
    Philly, PA
    Posts
    126

    Default

    In an HPDE evironment (didnt have a race license till last year)

    over the course of 2yrs i ran 12days of 4x 20-30min sessions with the 710s

    tossed them on for a test session last july cause they still had rubber left but they were 3yrs old and had gotten pretty darn hard and very little grip left.

    for someone who is still starting out in racing i cant justify the price difference for the R6s with how long that ive seen the 710s last. i know i wont run infront with the 710s but right now they arent whats holding me back

    as of right now i have a set of710s sitting in the basement in bags that had 2 full race weekends on them and 1 test day. ( 4 races, 4 qaul, 3 test sessions) still look brand new.

    hope this helps

  6. #6
    Join Date
    Feb 2005
    Location
    Basking Ridge, NJ, USA
    Posts
    267

    Default

    I have only run the R6 and would say that in my experience i get 3 competitive weekends out of them. 9 heat cycles.. (my driving is not very tire friendly.)

  7. #7
    Join Date
    Nov 2005
    Location
    South Park PA
    Posts
    59

    Default Kumhov710,Hoosier R6

    Most of the guys that run Hoosier in AS run the A6 for some reason they are the best tire for that group. I agree with cjb25hs the Hankook is a really good tire for the price. Most of the Guys that run out of McB Autosport have switched to the Hankook. You may thing abourt using the 245/40/17 as an option very popular for BMWCCA IP cars.
    AJ Anselm
    BMW 318 E prod

    Competition Chair for Steel Cities
    stcscca.com

  8. #8
    Join Date
    May 2008
    Location
    Cleveland, OH
    Posts
    327

    Default

    Quote Originally Posted by Aanselm View Post
    Most of the guys that run Hoosier in AS run the A6 for some reason they are the best tire for that group. I agree with cjb25hs the Hankook is a really good tire for the price. Most of the Guys that run out of McB Autosport have switched to the Hankook. You may thing abourt using the 245/40/17 as an option very popular for BMWCCA IP cars.
    Many of the top guys in nationals use the A6. While it may be a bit slower than the R6 over an entire race distance, it warms up quicker and is faster than the R6 during the initial 1-2 laps of a race.

    Using the A6 is a strategic choice because it helps you to gain or solidify position in that crucial 1-2 lap time frame before things become processional. And because the tire isn't that much slower than the R6 once both are thoroughly heated up, the A6 still enables you to hold off cars trying to overtake.

    The bad thing about the A6 is cost and durability. You're lucky if you get 200 miles out of a set, or so I'm told. Also, the A6 is very difficult to consistently drive on the edge of adhesion due to its vague feedback characteritics. It takes much practice with this type of compound to know its handling limits. Definitely not a tire for just anyone...
    Last edited by RedMisted; 01-28-2010 at 01:30 AM.
    Chris
    #91 ITR Mustang
    1st place-2008 Great Lakes Division Championship Series
    1st place-2009 Kryderacing Series

  9. #9
    Join Date
    Jan 2008
    Location
    North Olmsted, Ohio
    Posts
    519

    Default

    Quote Originally Posted by RedMisted View Post
    Many of the top guys in nationals use the A6. While it may be a bit slower than the R6 over an entire race distance, it warms up quicker and is faster than the R6 during the initial 1-2 laps of a race.

    Using the A6 is a strategic choice because it helps you to gain or solidify position in that crucial 1-2 lap time frame before things become processional. And because the tire isn't that much slower than the R6 once both are thoroughly heated up, the A6 still enables you to hold off cars trying to overtake.

    The bad thing about the A6 is cost and durability. You're lucky if you get 200 miles out of a set, or so I'm told. Also, the A6 is very difficult to consistently drive on the edge of adhesion due to its vague feedback characteritics. It takes much practice with this type of compound to know its handling limits. Definitely not a tire for just anyone...
    Chris - thats the best part of racing. To find out what the limits of your tires are
    You will be absolutly amazed switching from the Nitto's to the V710's or R6's. What a world of difference. So much more confidence!
    Greg Vandersluis
    #4 1990 Honda Civic Si
    #97 2003 Chevrolet Corvette Z06
    #93 2006 Ford Mustang
    Carbotech/BFGoodrich/Vandersluis Motorsports
    2010 Great Lakes Division ITA Champion
    2012 Great Lakes Division T1 Champion

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •