Strut Housing Needed

[Ron Earp]

Jeffrey and I ran into a snag with the strut housings on the Z. The right hand housing had a stock strut stuck in it. After about 3 hours of cutting, welding pieces on for the slide hammer, heating, cussing, air impact, and lots of other things we got it out of the housing. Then we cut the housing to shorten it but once done we fould the new Koni yellow strut won't fit into the tube by 0.01" of an inch. The strut tube happens to be a bit undersized. So, we need another right hand strut tube. Anyone have one to sell?