Results 1 to 20 of 97

Thread: December Fastrack is out!

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Feb 2001
    Location
    Purcellville, VA USA
    Posts
    902

    Default December Fastrack is out!

    I like the changes to the Mustang in ITS and the RX-8 in ITR!
    Chris "The Cat Killer" Childs
    Angry Sheep Motorsports
    810 417 7777
    angrysheepmotorsports.com

    IT,SM,SS,Touring, and Super Touring

  2. #2
    Join Date
    Apr 2008
    Location
    Orlando, FL
    Posts
    774

    Default

    So now we can run whatever sensors or air metereing devices we want, and chuck the stuff that came with the car?

    "Item 1. Effective 1/1/10: Change section 9.1.3.D.1.a.6 as follows:
    The engine management computer may be altered or replaced. A throttle position sensor and its wiring may be added or replaced. A
    MAP or MAF sensor and its wiring may be added. Other existing sensors, excluding the stock air metering device, may be substituted
    for equivalent units."
    Track Speed Motorsports
    http://www.trackspeedmotorsports.com/

    Steven Ulbrik (engineer/crew/driver)
    [email protected]

  3. #3
    Join Date
    Jul 2004
    Location
    Raleigh NC
    Posts
    3,682

    Default

    This is a clarification that appears in this fastrack:

    1. Clarify section 9.1.3.D.1.a.4 by adding a sentence after the first sentence: “All air must also pass through the stock air metering
    device, eg MAF, or AFM, etc if so equipped.”

  4. #4
    Join Date
    Dec 2001
    Location
    raleigh, nc, usa
    Posts
    5,252

    Default

    No!

    We changed that just to allow folks to add a MAF for systems that use a MAF.

    You still have to use the stock air intake track, and the stock metering device must be there.

    Quote Originally Posted by quadzjr View Post
    So now we can run whatever sensors or air metereing devices we want, and chuck the stuff that came with the car?

    "Item 1. Effective 1/1/10: Change section 9.1.3.D.1.a.6 as follows:
    The engine management computer may be altered or replaced. A throttle position sensor and its wiring may be added or replaced. A
    MAP or MAF sensor and its wiring may be added. Other existing sensors, excluding the stock air metering device, may be substituted
    for equivalent units."
    NC Region
    1980 ITS Triumph TR8

  5. #5
    Join Date
    Jul 2006
    Location
    Silicon Valley, CA
    Posts
    1,381

    Default

    Quote Originally Posted by quadzjr View Post
    So now we can run whatever sensors or air metereing devices we want, and chuck the stuff that came with the car?

    "Item 1. Effective 1/1/10: Change section 9.1.3.D.1.a.6 as follows:
    The engine management computer may be altered or replaced. A throttle position sensor and its wiring may be added or replaced. A
    MAP or MAF sensor and its wiring may be added. Other existing sensors, excluding the stock air metering device, may be substituted
    for equivalent units."
    MAPs or MAF may be **added**. You can't chuck what came with the car. Nothing new here about other sensors. The only change is to this rule is that the two words "or MAF" was added.
    Josh Sirota
    ITR '99 BMW Z3 Coupe

  6. #6
    Join Date
    Jan 2001
    Location
    Royal Oak, MI, USA
    Posts
    1,599

    Default

    Amusing note: talking about members/competitors unhappy with the shorter life of some safety harnesses. I'm glad that they do appear to be paying attention to us. I'm not so happy to hear that the information currently available is insufficient to make a decision one way or the other. Yet it was judged sufficient to change the rule a couple years ago.

    At least they are taking the step to retain a professional auto safety expert to help resolve the issue.

    Hope he/she's not an SFI member!?!
    Vaughan Scott
    Detroit Region #280052
    '79 924 #77 ITB
    #65 Hidari Firefly P2
    www.vaughanscott.com

  7. #7
    Join Date
    Jan 2001
    Location
    Royal Oak, MI, USA
    Posts
    1,599

    Default

    Don't forget also, in case anyone missed it - no more emails to the CRB for input, now there's a website form with tracking capabilities:
    http://www.crbscca.com/
    Vaughan Scott
    Detroit Region #280052
    '79 924 #77 ITB
    #65 Hidari Firefly P2
    www.vaughanscott.com

  8. #8
    Join Date
    Jan 2003
    Location
    Rockaway, NJ
    Posts
    1,548

    Default

    How the heck did the RX8 score that weight reduction???? Not loving that one bit :-(

    Or more specifically - what was the criteria used that established this car should be at a lower weight than originally classed? That was over 100 pounds dropped...
    BenSpeed
    #33 ITR Porsche 968
    BigSpeed Racing
    2013 ITR Pro IT Champion
    2014 NE Division ITR Champion

  9. #9
    Join Date
    Dec 2001
    Location
    raleigh, nc, usa
    Posts
    5,252

    Default

    Incorrect stock hp used initially. Lower than expected gain in IT trim, based on various dyno sheets received by the ITAC.
    NC Region
    1980 ITS Triumph TR8

  10. #10
    Join Date
    May 2001
    Location
    Canal Fulton, OH
    Posts
    291

    Default

    The RX-8 is now classed as it should have been, hopefully people will bring them out and boost ITR's numbers. The weight is as low as you could possibly attain in IT trim with a 200lb driver. Next should be the Fox body Mustangs in ITR.

    matt

  11. #11
    Join Date
    Apr 2001
    Location
    NH, US
    Posts
    3,821

    Default

    I thought it was against the rules to change a cars weight?
    RST Performance Racing
    www.rstperformance.com

  12. #12
    Join Date
    Dec 2001
    Location
    raleigh, nc, usa
    Posts
    5,252

    Default

    I have heard the grumbling about the Fox Mustang v. the SN94, and have to remind you guys that the "perception" the Fox is at a disadvantage to the SN94 doesn't mean it gets a weight change.

    We still do use the process on new cars, and the classed Fox and SN94 cars have essentially the same specs......and the differences aren't things we account for in the process.

    So, barring some evidence that the IT gain in hp is different between the two, they will stay at the weights at which they are set.

    Quote Originally Posted by xr4racer View Post
    The RX-8 is now classed as it should have been, hopefully people will bring them out and boost ITR's numbers. The weight is as low as you could possibly attain in IT trim with a 200lb driver. Next should be the Fox body Mustangs in ITR.

    matt
    NC Region
    1980 ITS Triumph TR8

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •