suspension set up

[jlinfert]

Dump the front sway bar.

[StephenB]

Dump the front sway bar.

Agreed!

Tim I may be wrong but you negleted to say that your diff is stock as well (AKA no quaffe or welds.. just an open diff) This plays a HUGE difference in setups as well I would think...

I bet you get a ton of wheel spin heading on to no-name straight! You may notice a bigger disadvantage at LR than NHMS

Stephen

[Flyinglizard]

LF camber, 3.0, Rf camber 1.0,
LR; toe out, 5-6mm, camber 1.5-2.0.
RR ; toe ,0, camber1.0
No front bar.
Swap the springs, front to rear. Front ride alt, Lower control arms, pointed up .5 in. . rear, ride alt, as low as it can go.
MM