Originally Posted by
splats
I've got over 10 hrs on my "NAPA-junk" hubs & bearrings with ZERO problems. During which, I even had a braking problem that melted & warped a set of Hawk Blues. Since I run the same tracks as Darryl & he was using the ACR hubs, how can you say which is better or worse (ACR vs NAPA)????????????
Quick poll:
Which Hub/Bearring were you using when it failed??
1) ACR (mopar)
2) non-ACR (mopar)
3) NAPA
4) other
Slow the cart down there a minute.......
I ordered 6 hubs from Napa and not one of them measured the same as any other one?
Hub failures on Neons; gen1, gen2, SRT-4 are very common. What tire compund you use, what spring rate you use, what bushings you have, all play a factor.
I have never broken one, but I replace them every 10 hours, period!
If you wish to risk your car, or your life with an inferior part, that is your business. No car leaves my shop with anything other than the Mopar piece.
Chris "The Cat Killer" Childs
Angry Sheep Motorsports
810 417 7777
angrysheepmotorsports.com
IT,SM,SS,Touring, and Super Touring
Bookmarks