Originally Posted by
Rich Walke
Mark, if this is the presilencer you have, I would like to talk to you about it. Please either email me at
[email protected] and give me your phone number, or give me a call at (847) 274-0283.
Thanks again.
The 16425P $249 http://www.racingbeat.com/resultset....tNumber=16425P has a hanger attached as well as flanges at both ends, it's a 3" presilencer. The ones I have used, $99 16435 http://www.racingbeat.com/resultset....rtNumber=16435 (purchased from Mazdatrix) is a bare unit, it's a 3" presilencer. I do not know if there is any difference in the actual presilencer. I can say for sure the 16435 has a very coarse stainless steel packing, I've opened one up before. Might check with Dave, you might be able to save $150 if you don't need 2 flanges and a hanger.
In any case, mine is already pending sale, it picked up interest a day after I first posted. If it falls through I'll let you know.
Mark B. - Dallas, TX
#76 RX-7 2nd Gen
SCCA EP
Former ITS, ITE, NASA PT
Bookmarks