Results 1 to 6 of 6

Thread: Toyo RA1 PSI

  1. #1
    Join Date
    Jan 2008
    Posts
    4

    Default Toyo RA1 PSI

    Looking for air pressure recommendations for Toyo RA1 full tread rains. Anybody still use these? Thanks in advance.

  2. #2
    Join Date
    Jan 2008
    Posts
    4

    Default

    BTW. Car is a ITB VW Jetta. Thanks.

  3. #3
    Join Date
    Jan 2004
    Location
    Camas, WA
    Posts
    531

    Default

    running in the dry or wet?
    Marcus
    miller-motorsports.com - Its always an Adventure (and woefully outdated)
    1.6 ITE/SPU/ST2 Turbo Miata (in pieces... err progress)

  4. #4
    Join Date
    Jan 2008
    Posts
    4

    Default

    Sorry, In the wet. I only use them as a rain tire, but never really figured out a good pressure to start out with. Luckily I haven't had a chance to use them much.

  5. #5
    Join Date
    Sep 2005
    Location
    Naperville, IL
    Posts
    86

    Default

    I have used 32 front / 34 psi rear with mixed success in wet conditions (normally run 28 / 30 in the dry).
    Jared Cromas
    2012-2010 & 2008 Midwestern Council ITA Champion
    2008 Midwestern Council Driver of the Year
    SCSCC Race Steward
    #111 FP/ST '90 Gold/Blk Acura Integra

  6. #6
    Join Date
    Jan 2004
    Location
    Camas, WA
    Posts
    531

    Default

    On our floatilla of Miatae,, on RA1's in a full wet race
    We start 24 front/22 rear, no sway bars
    on a wet but potentially drying track, we'll leave the bars on.
    YMMV, you might want to think about raising ride heights, and alignment changes and other more radical changes (or not).

    Edit: in the dry, we use much higher starting pressures
    Marcus
    miller-motorsports.com - Its always an Adventure (and woefully outdated)
    1.6 ITE/SPU/ST2 Turbo Miata (in pieces... err progress)

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •