Results 1 to 10 of 10

Thread: TeamDI Pro IT Vinyls Ready

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default TeamDI Pro IT Vinyls Ready

    The TeamDI Pro IT official sponsor decal packages will be handed out at NHMS on May 1st during Round 1 of the TeamDI Pro IT Series.

    We're sorry for the delay, but due to some new sponsor additions, we had to wait until all sponsors were confirmed and on board for the 2009 season.

    We'd like to thank all our sponsors, and especially H6 Innovations for making the decals for us. Below you can see what the final decals look like.

    Please reserve space on your car for the TeamDI pro IT Windshield Banner, and the TeamDI Pro IT side panel, which can be placed on your front corner panel behind the front wheel or on the front portion of your door (under the A-pillar).

    If you already have decals on your car, try to fit it in as best as possible. One idea is to convert these decals into magnets, this is something H6 Innovations can help you with if you're interested.




    Thanks and we'll see you this weekend!

    Regards,
    TeamDI Pro IT Staff
    ProITSeries.com





  2. #2
    Join Date
    Nov 2002
    Location
    Brookfield, CT. USA
    Posts
    342

    Default

    Where are the SCCA Club Racing Stickers going to be relocated to?
    Rob Driscoll
    ITS 25
    NER

  3. #3
    Join Date
    Jan 2003
    Location
    Rockaway, NJ
    Posts
    1,548

    Default

    Outstanding array of sponsors - and I am happy to say I buy many of the products and now have some new services to take a look at.

    Nice job - can't wait to race - see you at the track.
    BenSpeed
    #33 ITR Porsche 968
    BigSpeed Racing
    2013 ITR Pro IT Champion
    2014 NE Division ITR Champion

  4. #4
    Join Date
    Feb 2005
    Location
    Basking Ridge, NJ, USA
    Posts
    267

  5. #5
    Join Date
    Nov 2004
    Location
    Ligonier, PA, USA
    Posts
    1,676

    Default

    Will you be handing the decal packages out at all the Pro IT events?

  6. #6

    Default

    We will have these at every event starting this weekend at New Hampshire and then next week at Pocono.

    We have a winshield banner and a decal sheet for each door to be placed under the mirror on each side or behind the front wheel well. The point is to make all cars look consistent and give sponsors exposure. If this works it will be easier to get more help. I understand this may be a problem for a few people but we need to make this happen and look good for the sake of the series. We would also like to see everyone have their names on the lower passenger side winshield if possible. THANK YOU TO H6 INNOVATIONS FOR YOUR HELP AND SUPPORT. These guys are great and you will meet them at Pocono. Hawk Brakes will be present at New Hampshire along with Edwin of Raceshopper.com. OUR SPONSORS ARE ALONG FOR THE RIDE SO SUPPORT THEM PLEASE.

    Thanks
    Bob Zecca

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •