Results 1 to 20 of 89

Thread: Sentra SE-R

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2007
    Location
    Puerto Rico
    Posts
    40

    Default

    The progress group set up seems to be a good for the money entry level coil over I have no complaints over my setup since progress group can built a set to whatever the specification you need, since I’m racing a 2250 pounds b13 the spring weigh on front is 375 and 250 rear anything heavier than that will send the sentra flying all over the place I remember when I first ordered mine the costumer service guy who actually help mike on the design of the coilover told me to use a weight of 450 at front and 350 rear but it was too much when I first tested the springs on the race track the car was just too tight and never came to have a good grip so I ordered some springs from eibach at 375 F and 250 R and problem solved ,I know there are many konis with adjustability than can give a lot better performance than what I have but for 1000 bucks for more than an average coilover I think its fair what progress offer to costumers.
    Last edited by ramoncito89; 03-02-2009 at 06:30 PM.

  2. #2
    Join Date
    Sep 2005
    Posts
    1,489

    Default

    Brett -

    Great to hear about progress being made and another ITA racer joining us in MiDiv. Do you think you'll be able to make the double school at MAM April 17th-18th?
    Travis Nordwald
    1996 ITA Miata
    KC Region

  3. #3
    Join Date
    Mar 2001
    Location
    Connecticut
    Posts
    7,381

    Default

    Brett, it's my pleasure. If you have any questions, feel free to PM me and I'll send you my email address for more info. - GA

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •