Results 1 to 4 of 4

Thread: 6 series in ITR

  1. #1
    Join Date
    May 2002
    Location
    Genesee, MI, USA
    Posts
    7

    Default 6 series in ITR

    I seem to recall the 633 listed on the proposed ITR list some time ago, around 2700lbs. This was when the list still had pony cars. Has there been any more discussion regarding adding them and does anyone think it would be a competitive chassis?

  2. #2
    Join Date
    Oct 2004
    Location
    Northeast
    Posts
    7,031

    Default

    Quote Originally Posted by GREENLOCUST View Post
    I seem to recall the 633 listed on the proposed ITR list some time ago, around 2700lbs. This was when the list still had pony cars. Has there been any more discussion regarding adding them and does anyone think it would be a competitive chassis?
    HP ratings?
    Andy Bettencourt
    New England Region 188967

  3. #3
    Join Date
    May 2002
    Location
    Genesee, MI, USA
    Posts
    7

    Default

    181 hp, 194lbs of torque for the 633CSI. The European version is rated at 197hp at what appears to be the same cam and pistons. I would tuning and emissions so their may be some power to gained with an IT build.

  4. #4
    Join Date
    Apr 2008
    Location
    NH
    Posts
    14

    Default

    the 633 would be to hard to get parts for i have a couple of older M6's that i work on and some times it takes weeks to get parts. I all so think it would take alot of $ to make that car run up front and maybe cheaper just to buy or build a newer bimmer.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •