Now the fun begins. I have a brand new hub assembly, in the box, ready to go. But wait! The bolts that hold the hub in the knuckle don't look right! On measusuring the bolts to the bolt holes, the holes on the knuckle are 3.75" on center, and the bolts appear to the 3.25" on center.

Oh, well - I don't know if the hub in the box is the real deal, so I order an new hub from NAPA and take the knuckle down to the machine shop to get the broken one pressed out and a new one pressed in. But guess what!! Same deal. the bolts and the bolt holes don't match up. Strange - there are part numbers cast into the knuckle, and they agree with the part numbers listed in the Chrysler parts manual for that year.

So, NAPA is going to order a different hub and see if those bolts line up. As I said, fun and games.