*Improved Touring* 2002 Civic Si ?

[20CiviC02Si]

lemme call a cage guy in Northern Illinois I know and get a price, that will give you a comparason

Awesome! Thanks!

[prodogdriver]

My cage guy said that $2500 was a fair price and that is about what he would charge also. King does very good work so I would suggest using them
and if you ever sell the car a ‘King’ cage is a nice selling point also

Personally I would not concern yourself with making the car fast the first year, you want a reliable and consistent car to get you thru your driver’s schools and required races for your license. For tires you might like the Toyo RA-1, good wear, reasonably fast, inexpensive & get one set full tread to use as rains. The go fast tires are the Hoosier R6’s & Hoosier dedicated rain tires

Since I own an ’02 Si street car I’m looking forward to seeing this car ‘on track’ in the future, I make it up to Road America once a year

[Bob Roth]

If you are near wisconsin, you ought to consider calling Dan Navrestad at DCA racing fabrication, LaCrosse Wi, 608 781 3929. I don't want to put words in his mouth but for about $2500, my guess is he would put a beautiful cage in, and a kerkey roadrace seat, install your gauges, bushings, your race suspension, and fabricate your exhaust. He's built 3 of my cars, with nothing but compliments on the fabrication and assembly work. He's built drag, Nascar late models, and IT, and vintage racers. Wonderful guy to work with and fabricator.

Another nice thing is we have John Severtson as a mechanic at conway Service here too. 608 782 7345. John used to work as a mechanic at realtime racing for PD Cunningham. He is presently looking after a TSX world challenge car, my Teg r enduro car, my ITS Sol VTEC, and a bunch of dirt racing hondas. He would be well qualified to rebuild the engine and trans and brakes id you want to outsource that work.

good luck

[Bob Roth]

Also, Dan would be great at welding in upper camber/caster adjustable strut mounts if needed.

[20CiviC02Si]

Thanks guys for all the help. However i went out to Gingerman Raceway in South Haven, MI for a 2 day track event. I think i am going to wait on going wheel to wheel. I really would like to, however i am only 22 and the budget just isn't there yet. I still may have a cage installed next year by king because they are just down the road from me. Just in case i decide to go for it! I think i'll just focus on doing a couple PDX Time Trials and a couple big Time Attack events for next year.

I really do appreicate all the help, and maybe i'll see you guys around at some of the regional or national events here in the Midwest. I'm not sure if i'll be going to The Run Offs but i am going to try my best to get off. Otherwise i'll be trying to get off Aug 8-10 for ALMS, World Challenge, MX5 Cup races at Road America!

If you think you'll be at these events feel free to drop me a line here!

Thanks Again! I'll be seeing you all around.

[20CiviC02Si]

Well i may bring this idea back to the drawing board. I have realized that my EP3 has over 100k miles on the chassis and i have another DD that i can drive. So building the EP3 could become reality if i simply put my mind to it.

I understand that i should not concern myself with making it fast, and just safe and reliable. Now my question is this: "What is the minimum i would have to do to make my car qualify for ITA?"

I am currently waiting on the 09 GCR to come out for complete guidelines, and to ensure no changes have been made since.

[Xian]

Bare minimum would be:

Cage with door bars
Roll Cage padding
Seat with Harness
Kill Switch wiring
Steering lock removed
Glass Moonroof replaced/skinned
Airbags disabled
ABS disabled
Tow hooks front and rear
Decals
Transponder

I'm sure I'm missing some little stuff but that's all I can think of right off the cuff. For the price of the stuff above, you could buy a "ready to race" used car and sell your 02 Civic... net cost to you would be very little. This would leave $$ for the actual racing budget.

Christian